Shop Categories

GENUINE WALBRO 450LPH E85 Performance Fuel Pump, Install Kit & Hard Wire Kit 

Item Description



 

BRAND NEW GENUINE WALBRO 450LPH FUEL PUMP

MADE IN USA. SHIPS SAME DAY!

WALBRO PART # F90000267

**INCLUDES INSTALL KIT AS SHOWN**


**DESIGNED FOR USE WITH GASOLINE OR E85**


EXPRESS OVERNIGHT AVAILABLE  WE SHIP WORLDWIDE


 

SPECIFICATIONS:

Part Number: Walbro F90000267 (Also known as TIA485-2)

Condition: 100% BRAND NEW MADE IN USA

Design: Intank Turbine Style (Specifically designed for either E85 or gasoline)

Strainer Included: Yes
Flow: 450LPH
Minimum Voltage: 12V
Operating Pressure: 15-120 PSI

(final fuel pressure set by regulator)

 

INSTALL KIT INCLUDES:

[1] flat strainer

[2] hose clamps

[2] crimp connectors

[1] wiring connector

[1] long submersible rubber hose

 



PRODUCT INFORMATION:

 

All new for 2011, the Walbro F90000267 450LPH pump is the highest flowing intank fuel pump on the market, and is E85 safe to boot.  Walbro designed the pump to meet the  requirements of modern turbocharged applications where a single 255LPH fuel pump is insufficient.  The pump uses a turbine style design which incorporates two composite plastic blades, just like our HFP 255LPH pumps, as well as the Aeromotive 340LPH pump introduced last year.  The turbine design lends itself to extremely quiet operation, especially compared to Walbro's previous "gerator" pump design that had metal gears which were notorious for a very loud whining noise which could easily be heard over even the loudest aftermarket exhaust setups.

The Walbro 450LPH pump can flow anywhere from 15-120psi (the bypass valve is set higher than Walbro's previous fuel pumps, which were around 85psi).  Final fuel pressure is determined by your fuel pressure regulator.  Please note that this is an aftermarket fuel pump, and some modifications may be required to get it to fit.  The overal size is very similar to Walbro's previous generation GSS340/GSS341/GSS342, however the base is slightly enlarged as shown in the pictures.  Please email us with any installation questions.  We specialize in fuel systems, and can help out with any questions, or small parts you may need.

 

Horsepower capabilities?  No other intank pump on the market can come close.  This pump can support over 800hp using larger than stock fuel lines.  This pump can still support significantly more power than a Walbro 255LPH or any 340LPH pump even when using stock fuel lines.  


Walbro is a global market leader in engine management and fuel systems for outdoor power equipment, recreational, marine, and personal transportation. Walbro manufactures carburators, electronic fuel injection systems, ignition systems, fuel tanks, fuel pumps, valves, and fuel storage and distribution systems. Walbro offers value-added machining, electronics and assembly capabilities. Walbro has ISO certified manufacturing and engineering facilities in the United States, as well as in Japan, Mexico, Thailand, and China. 

Walbro Automotive Fuel Pumps Are Now TI Automotive


TI Automotive builds the most in demand drop-in fuel pumps under the Walbro brand name. TI Automotive performance fuel systems are easy to install. They deliver the feed your injectors need. As a Tier 1 OE supplier, TI Automotive supplies a wide range of high-performance in-line and in-tank fuels pumps, complete drop-in fuel modules, fuel pump kits and installation accessories. 



Kit includes a specific fit HFP Hard Wire Kit -


Installing a high pressure performance fuel pump in your domestic or import performance vehicle increases fuel delivery far above what the stock fuel pump was ever capable of.  But you will never be able to extract the full potential from the new pump unless you use a dedicated relay setup, commonly referred to as a "fuel pump hard wire kit."  Tests have shown that running a hard wire kit compared to your stock wiring can increase our a 255LPH fuel pump's output by 60LPH.  A fuel pump hard wire kit's purpose is to provide consistent, reliable voltage to the pump, above what the old, deteriorated, stock wiring is capable of.

 Our kit includes a SEALED weatherproof 40amp relay and socket, and 12" of   280mm wiring.

- Basic wiring instructions are included - 


About Us

Our name says it all, FUEL PERFORMANCE, when it comes to Fuel Delivery we have it covered.
Fuel Performance Limited is an Online Webshop that continues to grow from strength to strength.
What are we known for? We offer unbeatable pricing on a continuously growing list of the biggest name brand performance parts in the world. In addition, we pride ourselves on providing specialised fitment kits to all parts wherever possible. 
We specialise in Fuel Pump Kits for Automotive, Automotive Performance, Motorcycles, Scooters, ATV, UTV, Tractors, Jetski's, Watercraft, Marine and Snowmobiles!
Our aim is to provide fast and efficient service delivery of accurate fitments to our Customers.
All orders must be placed via our Ebay Shop or Websites.
We operate globally and have Offices, Resellers, Distributors & Warehouses worldwide.

Payment

We use PayPal for secure payment and customer protection.
We do not store credit card details nor do we share customer details with any 3rd parties!

Shipping

Orders cannot be collected.
All Prices Include FREE UK 1st Class Standard Delivery - (2-3 Working Days)
We do offer express UK Next Day shipping which can be selected under the shipping options -  3pm Cut Off time!
All Shipping options are available for the EU & Worldwide!

Terms

Please be aware that under no circumstances will FUEL PERFORMANCE LTD be held responsible for any labour or repair costs or any other costs incurred from parts found to be faulty, defective or incorrect or any other costs arising from parts supplied.

Warranties:
We offer full Manufacture Factory Warranty. 
Make sure you read product specific warranty terms & Conditions & procedures on the manufactures websites before purchasing.
A replacement will not be dispatched until we receive the Faulty part back and it is tested and confirmed to be faulty by the manufacturer.  
The buyer is responsible for all return shipping costs.

AEM & INNOVATE:
AEM & INNOVATE offer Full Customer Tech Support which must be used before any Warranty will be handled.
A RMA number must be obtained from the Manufacturer by the customer before any suspected faulty part can be returned to us.
** AEM / INNOVATE / ZEITRONIX do not Warranty Wideband O2 Sensors **

Returns

Returns are accepted within 30 Calendar days. 
Purchased Items must be in new unused condition and in the original packaging as you received it and the SEAL NOT Broken or Opened. 
It is your responsibility to make sure you are purchasing the correct item.
The customer is responsible for all return shipping costs.
If you receive your order and find something is missing or damaged you are to make contact with us within 24 hours of receiving your order.
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.