|
Product Features
- ✨Description: Use a new type of bidirectional high-power thyristor, because the current can reach 80 amps, which solves the overcurrent problem caused by the slight resistance of the electric furnace wire when it is cooling. it can easily adjust the output voltage of the mains, Any adjustment between 0-100% (220 volts divided into 100 steps, non-linear), for use by electrical appliances. Such as electric furnace, water heater heat adjustment, light adjustment of lamps, small motor speed adjustment, electric soldering iron temperature adjustment, etc. So as to achieve the effect of dimming, temperature regulation, and voltage regulation.
- ✨Features: The voltage regulator is equipped with a two-way high-power thyristor, which can be used without adding any components. It is very convenient and practical. It comes with a heat sink, and the heat sink is thickened and enlarged. The mains output voltage can be easily adjusted and can be adjusted between 0-220V, and the power supply can be used.
- ✨Power: 6000W (resistive load limited power), the administration should be reduced for a long time, it is recommended to use the resistive load at room temperature within 3000W (key parameters).
Note
- 📝This product is AC input, AC output, can only step down, and must be connected to the load to adjust the voltage, the output must be connected to the load, it is useless to connect a multimeter without load, it is not a transformer, if there is no load connected to the output, the output voltage will not Change.
- 📝This product is not a panacea, it cannot replace the battery charger of an electric vehicle, nor can it drive electrical appliances that use switching power supplies (such as 110v TV stereos refrigerators air conditioners rice cookers with computers), nor can it drive induction cookers and energy-saving lamps.
- 📝Note that the plastic cover on the connector is easy to break if you use too much force.
Product Specification
| Type |
6000W High Power Thyristor Electronic Voltage Regulator |
| Knob Inner Hole |
6mm (0.24in) |
| Input Voltage |
AC110V/220V |
| Output Voltage |
AC10-220V |
| Regulating Voltage |
AC 0-220V, Under Resistive Load Conditions |
| Starting Adjustment |
More than ten Volts and the callback can reach 0 |
| Output Current |
41A |
| Maximum Power |
6000W (Resistive Load Limit Power) |
| Thyristor Model |
BTA41600B |
| Efficiency |
Over 90% |
| Working Temperature |
-40~+85 Degrees |
| Application Field |
Industrial Grade |
| Dimensions |
130x60x47mm/5.12x2.36x1.85in |
| Quantity |
1 |
Package Included
- 🎁 1 x Electronic Voltage Regulator
Location Descriptions
To improve your buying experience and ensure fast delivery, Your order will be shipped from the warehouse located in either new jersey or california that is closest to your address. If you have any questions, Please contact us. Thank you for your support ! |
