NOW WITH - E FUEL / ALCOHOL RESISTANT/ EXTENDED LIFE DIAPHRAGMS!

Both Early spring loaded and Late included!

Not just an excellent replacement for any regular grade of gasoline, This will stand up to the various ethanol mix fuels around the country as well as High Octane race fuels 110 + .

IMPORTANT!!  TOP GASKETS WITH CUT OUTS WILL ALLOW FUEL SPILLAGE OVER INTO THE JET AND BODY AREAS AND THE FLOATS TO BOUNCE- CAUSING FLOODING AND RICH RUNNING ENGINES WHEN DRIVING, TURNING OR BOUNCING ON ROUGH OR OFF-ROAD CONDITIONS, MAKING THE CARBURETORS MOTION SENSATIVE. OUR SOLID CENTER GASKETS PREVENT THIS. A MUCH BETTER DESIGN. DON’T BUY A KIT WITH DEFECTIVE TOP GASKETS!

This is the exact kit used in the new November Hot VW's Magazine article on rebuilding IDF carburetors .

The original RADKE SERVICES 703 kit, Not a cheap knock off. 

Hot VW's exact quote "Luckily, most carburetors are easy to rebuild, as long as you have a good kit. for this rebuild we are using a Weber IDF rebuild kit #703 from Radke Services that fits 40,44 and 48 Weber carbs as well as the similar empi hpmx models. The nice thing about this kit is that is includes a new float, needle/seat with Viton tip, early and late accelerator pump diaphragms and spring, idle richment screws, all gaskets, O'rings, seals and even A fuel filter. About the only other things you'll need for the rebuild besides a few hand tools, is a gallon of carburetor and parts cleaner"  

THIS IS A QUANTITY DISCOUNT PRICE FOR 2 COMPLETE KITS FOR THE OWNER REBUILDING A PAIR OF WEBER 40-44-48 IDF'S OR EMPI HPMX 40-44'S

 NOW OVER 6,500 SOLD WORLDWIDE!!

THESE ARE BRAND NEW COMPLETE REBUILD / OVERHAUL KIT'S FOR WEBER 40-44-48 IDF CARBURETORS ALSO EMPI HPMX'S. 

THESE KITS INCLUDES EVERYTHING YOU NEED TO COMPLETELY SERVICE YOUR CARBURETORS, INCLUDING NEW FLOAT AND AIR - FUEL SCREWS & SPRINGS.

THE TOP GASKETS ARE FROM O.E. MATERIAL. TO SPEC.

THE BASE GASKETS AND TOP AIR FILTER GASKET AS WELL AS THE CHOKE BLOCK PLATE GASKETS ARE CUT FROM U.S.A SURE SEAL MATERIAL. THESE ARE THE GASKETS YOU BUY AFTER YOU THROW AWAY THE ORIGINAL WEBER GASKETS THAT ARE TOO THICK AND STIFF AS CARDBOARD. ALSO OUR KIT STILL INCLUDES THE EARLY ACCELERATOR PUMP DIAPHRAGM, IN EFUEL SAFE MATERIAL. NOW GONE FROM THE OTHER BRAND KITS.

EACH KIT CONTAINS:

3 - SOLID CENTER TOP GASKETS 40-44-48

1 -  AIR FILTER BASE

1- EARLY ACCELERATOR PUMP DIAPHRAGM - E FUEL / ALCOHOL RESISTANT

1- LATE ACCELERATOR PUMP DIAPHRAGM - EXTENDED LIFE  - E FUEL / ALCOHOL RESISTANT

1 - ACCELERATOR PUMP DIAPHRAGM SPRING

1- FLOAT

1- NEEDLE/SEAT WITH VITON TIP

2 - 40MM BASE GASKETS

2 - 44MM BASE GASKETS

1 - CHOKE BLOCK PLATE GASKET

2 - AIR FUEL VOLUME MIXTURE SCREWS,  SPRINGS, CUPS & O'RINGS

1 - INTERNAL FILTER SCREEN

1 - FLOAT BOWL VENT SCREEN (OPTIONAL)  -  (YOU MAY NEED TO OPEN YOUR VENT SLOT TO USE THIS, DEPENDING ON YOUR CARB TOP.)

ALL NECESSARY  IDLE JET O' RINGS AND INLET, PUMP JET AND SCREEN  SEALS TO OVERHAUL YOUR UNIT.

1 each PRINTED DIAGRAM SHEET for the pair. .

ALSO 1 each UNIVERSAL FUEL FILTER THAT CAN BE USED FOR 1/4" FUEL LINE OR CUT TO 5/16" for the pair 

THIS IS A WELL THOUGHT OUT QUALITY 39 PIECE KIT.

WE ARE THE MANUFACTURER OF THIS PRODUCT AND  HAVE SOLD OVER 6,500 THESE KITS TO WAREHOUSE DEALERS AND SHOPS WORLDWIDE

THANKS FOR LOOKING