At Buzzweld we don't just sell paint. We sell you products we use on our own vehicles, that we support, and that we believe in. Many companies today simply sell you a "solution" and wash their hands of you.
We do not believe that customers do not value service, knowledge and support as well as great products. We have access to the most qualified staff in the world to support the use of our products, and their application.
This kit contains a 1000ML tin of Rust Encapsulator RE. enough to two coat half of a chassis, several bumpers, or some axles.
• RE is a single pack quick drying product. Drying time can be in as little as 5 minutes.
• RE contains a stabiliser pigment that neutralises rust over time, creating an INERT protective layer, preventing rust from returning.
• RE is a SINGLE PRODUCT SOLUTION. You simply clean off any loose rust, and apply our coating direct to steel or rust. Thats it. rust sorted, and primed in one product.
• RE can be top coated with msot single pack, and two pack epoxies and polyurethanes including ALL of our top coats and primer/ finishes such as WAR, CIO, 2K Armour, and Buzzweld 1.
There is so much mis-information in the domestic market for products. Claims that rust is ended permanently, that the product lasts a lifetime, and the most common one being that someone is selling a corrosion inhibitor. When you have to use several different products to achieve a solution that at best lasts a few years then they can't be telling the truth really can they!
We stand behind our products 100%.
1. We have no set hours. I have shipped customer orders at midnight.
2. Unrivaled support. Who else will endevour to answer your technical queries at 11pm on a sunday? Whilst i don't guarantee 24/7 support we do an incredible job of answering all questions, and providing support AT ANY TIME.
3. Do it once, do it right. If you are welding/ repainting your vehicle it is because the protection you had in place was in-sufficient, and not up to the task (or quite likely "not as advertised").
4. Email me Craig@buzzweld.com, or contact me here.
5. Use only our thinners and our recommendations in our application guides (available on our website)
Land Rover defender discovery Range Rover series lightweight 101fc 88 90 100 101 110 130 vw jeep Mitsubishi Toyota pickup land cruiser mx5 classic car chassis black frame paint.
Due to couriers Charging premium rates of up to 300% for areas of Britain, as well as UK Mainland we may have to pass some of these costs on. A significant proportion of our customer base is within these areas and we feel there should be no premium to pay, however our courier system does not work in this way, and we cannot carry these highly inflated costs.
Wherever possible we will absorb or subsidize these costs. For example on larger kits we can move more, on small orders less so. If you are unsatisfied with this please contact me and I am happy to explain further, and more importantly Lobby your MP, and the couriers to change this. We have already done so as we feel it is unfair.m
Product Description
RE Rust Encapsulator Primer is your closest modern equivalent to Old Red Lead with some distinct advantages over even our other Primer RCP (rust control primer).
Rust Encapsulator has almost no sinkback even for a 1K single component product, so is also superb for applying to rougher chassis to not only protect them but improve their appearance. Add in RE's ability to fully stabilise existing corrosion, it doesnt have to be top coated, its higher adhesion that RCP, with a very fast cure time, and is highly compatible with 1K and 2K coatings, and we have a tolerant, easy to use versatile product.
RE has improved wetting out abilities when compared to our other fast cure products like CIO, so is the perfect upgrade as a base primer for heavier corrosion. Moving on from that article the higher the solids content of a product, the harder it is for it to wet out and follow the profile of the item you are painting correctly (2k armour suffers here, and needs a good key, which is where RE becomes so versatile that it can be applied to smoother or rougher metals/ corrosion and still work), however, too high a solvent content and you will not get enough physical product left on piece you are trying to protect.
RE will wet out incredibly well using the correct balance of solids vs solvent, prior to setting to its DFT (dry film thickness). RE will consistently out perform even CIO Chassis In One (because it is an All In One type product), and 2K Armour (because of its solids content) on Heavier corrosion. Above and beyond most coatings RE contains a pigment that takes rust in its reactive form, and over a period of around 9 months stabilises it to Magnetite an incredibly low reactive form.
To summarise RE wets out extremely well, leaves a high build film behind protecting the peaks of the substrate, takes long enough to cure to be effective in searching out moisture and air, whilst being fast to cure, and having high adhesion, all the while stabilising what is already there without having to burn or remove it. The coating once cured is very tough, doesn't suffer from Sub surface corrosion which can spread and lead to Rust creep, does not require top coating, and remains semi flexible.
RE's real strength is that we combined three products into one. RCP we took the corrosion stabilisation, Fluid etch we took the adhesion, and FCP we took the cure process from to create a product that works almost anywhere with almost anything.
Available in :-
Aerosols, Paint tins and Schutz ready to spray tinsGood for
Suitable for
Poor for
Preparation
Application
AEROSOL
Compatibility
RE is exceptionally compatible with other coatings. Sensible guidelines to reduce the risk of product reactions are as follows.
Notable attributes
DO.
DO NOT
COVERAGE
Aerosol
Tinned
CURETIMES (Typical)
Please be aware cure times can vary wildly. Air movement, film thickness, relative humidity, air flow and temperature all play a large part in the actual cure time of a product. Additionally temperatures below 10C can see the cure times extend exponentially if all conditions above contribute in a negative way.
Aerosol
Tinned
Top Coating.
Rust Encapsulator must be touch dry prior to top coating with another product. No prep is needed to allow other coatings to adhere to RE in most cases.