AC Phase Control Circuit (Dimming Circuit)

Leading Edge AC Dimmer

now available wiring diagramm for Raspberry boards 

Module contains a Triac triggering coupled with zero-cross detector mechanism
for programming the intensity of incandescent lamps, AC LED dimmable bulbs, heating elements or fan speed controlled through a micro-controller.
 

Working voltage from 110v to 240v.
Auto detect 50Hz or 60Hz.
Zero-Cross detection (with zero/cross output pin SYNC).
Compatible with any ARDUINO, RASPBERRY boards.

Low voltage side and high voltage side is completely isolated.

Dimensions of the PCB 50mm x 50mm (1.97inch x 1.97inch). 

Four mounting holes diameter 3.2mm (0.13inch).

The distance between mounting holes is 42.7mm.

Connected LOAD current 2A long-term and 5A short-term.

Not for controlling via PWM signal !

NOT appropriate to change the brightness of  fluorescent lamps !!!

For inductive load controlling must be connected RC snubber, search it in my store!!!

FREE ARDUINO codes for ARDUINO and RASPBERRY boards .

Warning: This project deals with AC electricity which is dangerous if you don’t know how to treat it safely. 

You must treat electricity with caution!

Descriptions of pins:

AC Control Module	Description
+5V	device power, DC 5 volts
SYNC	zero-cross detector output positive impulse (pulse length 200us)
GATE	triac gate input pin
GND	ground of low voltage side
AC INPUT	AC voltage input  110/220
AC LOAD	Connect your load  here !

 

How to connect AC Control Module to ARDUINO UNO board:

NOTE: please observe the polarity of the network

Wiring diagram in high resolution - drive.google.com/open?id=0B6GJokXFb5oETlNxTkVkXzZZQUE

 

Watch video on YouTube - youtu.be/Oq6Cnqwbbbg

AC LED Bulb - youtu.be/oqRyJLcfOxo

Arduino sketch - drive.google.com/open?id=0B6GJokXFb5oEZndCUkNHc181Zms

 

Now available Android application to control manually dim level

Android application - drive.google.com/open?id=0B6GJokXFb5oEVElPS196ODF4U2s

Arduino sketch (need HC-05 Bluetooth module) - drive.google.com/open?id=0B6GJokXFb5oERHktRzF5MHBnUDQ

 

 

Wiring diagramm for connection with Raspberry board or any other master device via UART

 

 

Raspberry diagramm in high resolution - drive.google.com/file/d/0B6GJokXFb5oETTJoWkF1TG0xU2M/view?usp=sharing

 

Arduino code for ATMEGA328P microcontroller (MICRO, NANO, UNO Boards) - drive.google.com/file/d/0B6GJokXFb5oEV2JSaUVYTkg4WFk/view?usp=sharing

 

 

 

Worldwide shipping with Tracking number.

Dispatching next business day.

Estimated delivery time to Europe 5-10 business  days, others countries up to 30 days.

 

Free contact me, if you have any question !