You may also like
10.5-30V : use for 18v 36cells solar panel.
20 - 45V ; use for 24v/36v solar panel.
Send from NSW,AU,2-6 working days delivery with tracking.
1. The inverter is designed to handle PV panels as input source only and will not work with batteries/wind turbines as input source.
2. The 18V inverter panel Voc voltage needs to be less than 31V. For 24V/36V inverter panels, the Voc voltage needs to be more than 31V but less than the maximum PV input (as updated by the inverter).
3. The minimum power for solar panels should be half the power of the inverters.
4. If the red LED light on or all LED lights are off, please contact us first. Sometimes replacing some AC or DC side parts can make the item work again.
5. Before using the item, please make sure that all connections are tight. Otherwise, the product may short circuit.
6. The fan will turn on when the temperature inside the item reaches 38 degrees.
7. Please make sure that the item is in a good environment for cooling.
LCD display,remote meter
Optional remote meter to our gird tie inverter
Automatic identify the inverter, and display relevant parameter data and system working status
Screen data : ac voltage,current and frequency,generating capacity,power factor
Creative MPPT technology, efficiency more than 90%
Parallel type design for DC input and modularization design
Small volume, distributed installation, easy for system configuration
Adopting high-frequency isolation transformer type, high efficiency
Perfect electrical protection function
Stackable and Easy to install
Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.
The output need to be connected to the grid power. Can not supply power directly to the AC loads.
Introduction
Grid tie inverter is a device which directly converts direct current into alternating current which
sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key
device of power generation systems such as PV power generation system.Smart Microinverter specially optimized design
to work with modularization of DC power supplies which includes the mainstream solar modules,
18V (36 cells), 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels.
Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV
power generation systems.
Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No
need spaces for independent installation and low voltage DC wire connects from the PV module to
Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design
philosophy for Smart Microinverterl insures the productiveness of the whole system and will not
affect by a single point of failure. Each Smart Microinverter is individually connected to one PV
module in the array. Each PV module has the individual Maximum Peak Power Point Tracker
(MPPT) control and insures the maximum power is exported to the utility grid regardless of the
performance of the other PV modules in the array. When PV modules in the array under non-ideal
conditions in practical applications such as PV modules are affected by shading, soiling,
orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy
production from the whole PV system and gets return on investment in less time.
Advantages of Smart Microinverter
1. Unique circuit design, choice of import industrial electronic components, higher efficiency, more
stable performance.
2. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more
reliable.
3. Parallel type design for DC input and modularization design for inverter, small volume, distributed
installation, easy for system configuration, flexible for combination, strong expansibility of system.
4. Adopting high-frequency isolation transformer type, high efficiency, and high security.
5. Perfect electrical protection function.
6. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion.
7. Getting electronic circuit design, appearance design and other core technology patents.
10.8-30V Version Rated Power 1000W Solar Panels 36 cells/18V DC Input Range 10.8-30V MPPT Voltage 15-23VDC AC Output 230V(190-260V) Frequency 48Hz-62Hz THD <5% Power Factor >97.5% Stand-by Power ＜1W Certification CE RoHS 20-45V Version Rated Power 1000W Solar Panels 60/72 cells ; 30V/36V DC Input Range 20V-45V MPPT Voltage 26-36VDC AC Output 230V(190-260V) Frequency 48Hz-62Hz THD <5% Power Factor >97.5% Stand-by Power ＜1W Certification CE RoHS
