- Wheel Spacers
- For ACURA
- For AUDI
- For BMW
- For CHEVROLET
- For DODGE
- For FORD
- For HYUNDAI
- For INFINITI
- For JEEP
- For LAND ROVER
- For LEXUS
- For MAZDA
- For MERCEDES-BENZ
- For MINI
- For MITSUBISHI
- For NISSAN
- For PORSCHE
- For SAAB
- For SCION
- For SUBARU
- For SUZUKI
- For TESLA
- For TOYOTA
- For VOLKSWAGEN
- For VOLVO
- Wheel Adapters
- Wheel Hanger
- Hub Centric Rings
- Titanium Wheel Lug Bolts
- Aluminum Wheel Lug Bolts
- Aluminum Wheel Lug Nuts
- Other
Kit enthalten |
2x Distanzscheibe + 10x Radschraube |
Drehmomentspezifikationen |
113NM / 140NM |
Fahrzeug PCD |
5x120 MM |
Nabe zentrisch | Ja |
Rad PCD |
5x120 MM |
Material |
Geschmiedetes Aluminium 6061-T6 |
Dicke |
50 MM / 2" Zoll |
Mindestanzahl der Umdrehungen für Schrauben / Muttern |
6.5 /7.5 Umdrehungen |
Zentrum Bohrung (ZLB) |
72.56MM / 72.6MM |
Passende Modelle |
BMW |
Gewindesteigung |
12mmx1.5 / 14x1.25 |
Farbwahl |
Schwarz eloxiert |
Stud Grade |
12.9 SGS Geprüft |
Marke |
BLOXSPORT |
- Hochfeste Flugzeug-Aluminiumlegierung 6061-T6, geschmiedetes Material.
- Marke Rad Abstandshalter, Echtes Material, Laser Materialnummer und Logo auf Abstandhalter / Adapter.
- Hart eloxiert für Haltbarkeit und Korrosionsschutz.
- Precision Engineered Hub-Centric und Model Specific für perfekten Sitz und Rad Balance.
- Begrenzte Lebensdauer, getestet für Radschrauben / Bolzen (1 Million Mal) gemäß ISO3800.
- Festigkeitsgeprüft für Anwendungen (Bolzen / Bolzen / Mutter) gemäß ISO898-1, ISO898-6, SAE J429, SAE J995.
- Anti-Rost getestet (NSS 72 Stunden) für Anwendungen (Bolzen / Bolzen / Mutter) gemäß ISO9227.
Bitte überprüfen Sie die folgenden kompatiblen Modelle für diesen Artikel:
1 er F20 F21 E87 E81 E82 E88 128i 135i(2007-2018)
2 er F22 228i(2014-2018)
3 er F30 F31 F34 320i 328i 335i M3 E36 E46 E90 E91 E92 E93(1990-2018)
4 er F32 F33 428i 435i(2014-2018)
5 er F10 F11 F07 M5 F10 E60 E61 E34 E28(1985-2018)
6 er F12 640i 650i M6 F06 F12 F13 E63 E64 E24 645Ci 645Ci 650i(1976-2018)
7 er F01 F02 E65 E66 740I 740Li 750i 750Li 760i 760Li E38 E32 E23 730I 730Li(1977-2018)
X1 E84 X3 F25 X3 E83(2009-2018)
- 8 Main Advantages
- Hub Centric Design-- NO VIBRATION
(1). Hubzentrischer Distanzring: Der Zentrierring passt exakt in den Radraum, genau wie der Zentrierring der Nabe. Dies bedeutet, dass das Gewicht des Autos immer noch auf der Nabe und nicht auf den Radbolzen ruht, was bedeutet, dass das Fahrzeug genau so aufgebaut ist, wie es von der Fabrik kam, dh keine Vibrationen von den Rädern und auch die Bolzen schützen.
(2). Nicht-zentrikulärer Radabstandhalter: Das Gewicht des Fahrzeugs liegt nicht mehr auf dem Positionsring und ist jetzt auf den Bolzen, es verursacht leichter Vibrationen von den Rädern, und Bolzen tragen das gesamte Gewicht des Fahrzeugs.
(3). Das BLOXSPORT Team entwickelt verschiedene nabenzentrische (Rad-zentrische Lippen) für verschiedene Automodelle. Machen Sie das Auto mit hoher Geschwindigkeit, Geschwindigkeit querfeldein sicherer und stabiler. Um sicherzustellen, dass keine Vibrationen oder Erschütterungen auftreten.
-
SAFETY--Forged Aluminum Alloy Material
(1). As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety.
(2). But BLOXSPORT insist on using the FORGED material, insist on the conception of putting safety in the first place and reject to use the casting material. We made laser material number(Forged Aluminum Alloy 6061-T6 ) and brand logo on spacers. Refuse "Three-None".
- Bolts/Studs/Lug Nuts
Bolt/Stud affects the safety performance directly, so they are very important accessories. The good product
is always along with the test report and can bear series of test.
The world is moving forward and we are improving
BLOXSPORRT had upgraded the studs/lug nuts:
(1). Studs/Lug nuts: surface treatment is from chroming to dacromet, becoming more anti-rust(10 Years);
(2). Studs: material is from SCM435 Alloy steel to SCM440 alloy steel, so the grade level is from 10.9
grade(vehicle
original level) to 12.9 grade(rally racing level).
- SGS Tested Reports
BLOXSPORT insist on using the World's Largest Third-Party Testing Authority--SGS, Tested for Studs/Bolts/Lug Nuts.
- Machining Precision -- CNC Machined
Professional Data Measurement: The consummate data comes from constant practice, BLOXSPORT
always make perfection more perfect.
CNC Machined: The wheel spacers were modern CNC machined, Accurate to 0.02mm Machining precision. The surface was more smooth, increasing car driving more stable and more secure and no vibration.
- Black Hard Anodized Finish
@ Black color hard anodized is more beautiful and luxuious, anti-rust.
- How Thick Should your car fit?
Before you buy, please confirm that this is the thickness you need. If you not sure which thickness you can
install for your car, please use the measuring device to measure from the inside of the straight edge to the
inner fender lip as below showing.
- Item Benefits:
- Remove gad by spacing wheel and tire out to fit with fender after handing
- Increased performance in wheel drive conditions, improved appearance.
- Improve brake caliper clearance, BLOXSPORT spacer adds more clearan between brake caliper and wheel.
- Add inner fender clearance, add clearance between tire/wheel and inner fender.
- Add clearance between suspension and tire/wheel.
- Product effect:
- Increase the car wheel track, reduce the body center of gravity, reducing the body deformation.
- To improve vehicle stability and improve handing and other functions.
- To ensure that the car is more flexible, smooth and safe.
- To be able to make the sability of the vehicle greatly ascend.
you will get a better experience.
- Installation Remind
- Installation should only be performed by a trained professional.
- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
- Please take the necessary measurements to ensure proper fitment. we only guarentee that you will receive the spacers that is described, we do not guarentee any fitment onto any vehicle.
- Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation.
- If the studs are longer than the Adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your exsisting lugs if you choose not to purchase shorter studs.
- If you have any questions reguarding how to properly measure your bolt pattern, please contact us via ebay, and we can give you detailed instructions.
- Factory Shows
We are the manufacturer, welcome to contact us for OEM customized service.
- Safety guidelines(Minimum number of turns for wheel bolts/nuts)
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12 mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2"-20UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
- How much standard torque force of different lug bolts or nuts is?
--All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday.
--All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs.
--Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive.
--We will provide you with tracking numbers when the item is shipped out.
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the SGS 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).
