| Men's Size Chart-Body Measurement | S | M | L | Xl | 2xl | 3xl |
| Chest To Fit (Inch) | 38-40 | 40-42 | 42-44 | 44-46 | 46-48 | 50-52 |
| Chest To Fit (Cm) | 92-97 | 97-102 | 107-112 | 112-117 | 117-122 | 122-132 |
| Shirt Collar To Fit (Inch) | 14.5-15 | 15.5 | 16-16.5 | 17-17.5 | 18-18.5 | 19-19.5 |
| Shirt Collar To Fit (Cm) | 37-38 | 39.5 | 41-42 | 43-44.5 | 45.5-47 | 48-49.5 |
| International Conversion | ||||||
| Austria, Switzerland, German, Netherlands, Sweden | 46 | 48 | 50 | 52 | 54 | 56 |
| Belgium, Spain, France, Portugal | 38-40 | 40-42 | 42-44 | 44-46 | 46-48 | 48-50 |
| UC701 Mens Pinpoint Oxford Full Sleeve Shirt - Garment Measurements | S | M | L | Xl | Xxl | 3xl |
| Chest 1/2 Measurement (1' Below Armhole) (Inch) | 21.5 | 22.5 | 24 | 25 | 26 | 28.5 |
| Collar Length (Inch) | 14.5 | 15.5 | 16.5 | 17.5 | 18.5 | 19.5 |
| Length (Neck Point On Shoulder To Hem) Front (Inch) | 31 | 32 | 32.5 | 32.5 | 33.5 | 34 |
| Sleeve Length (Shoulder To End Of Sleeve Including Cuff) (Inch) | 24.5 | 25 | 25 | 25 | 25.5 | 26 |
| UC701 Mens Pinpoint Oxford Full Sleeve Shirt - Garment Measurements | S | M | L | Xl | Xxl | 3xl |
| Chest 1/2 Measurement (2.5cm Below Armhole) (Cm) | 54.5 | 57 | 61 | 63.5 | 66 | 72.5 |
| Collar Length (Cm) | 37 | 39.5 | 42 | 44.5 | 47 | 49.5 |
| Length (Neck Point On Shoulder To Hem) Front (Cm) | 79 | 81.5 | 82.5 | 82.5 | 85 | 86.5 |
| Sleeve Length (Shoulder To End Of Sleeve Including Cuff) (Cm) | 62 | 63.5 | 63.5 | 63.5 | 65 | 66 |
Before washing, always look at the care label and carefully follow the instructions. Most good quality detergents, washing machines and fabrics are manufactured to ensure that when the stated instructions are adhered to and the garment is washed according to the said temperature and dried as per the procedures mentioned; they will wash well and look good after each wash.
The following points should be used as guidelines for all garments:
Before washing, close all zips, undo buttons, check pockets for loose or sharp objects, flatten out collars and cuffs.
Always refer to the Label before Washing.
Always check to ensure the Washing Machine is not overloaded.
Use a good quality detergent and ensure that the right amount of detergent is used.
Owing to the numerous processes and techniques used for printing on garments, we strongly recommend that a single garment is printed on, then washed and tested to ensure it meets your requirements before bulk printing. Care should be taken to ensure the right kind of pigments/printing dyes are used while printing and the optimum temperature/heat levels are not exceeded. Violation of standards and procedures will result in the garment loosing it’s feel/lustre as well as weakening of the fabric and overall garment performance.
60 Degree Wash: Spin Cotton Cycle
60 Degree Wash: Spin Synthetic Cycle
40 Degree Wash: Spin Cotton Cycle
40 Degree Wash: Spin Synthetic Cycle
Low Heat
Medium Heat
High Heat
Warning: Do not Tumble Dry
Dry Clean: Normal Cycle
Any solvent except Trichloroethylene
Warning: Do not Dry clean
Warning: Do not Bleech