MOTOBATT MB3U AGM BATTERY 12V 3.8Ah 50CCA HONDA XL200R (83-84) 200CC
MOTOBATT MB3U AGM BATTERY 12V 3.8Ah 50CCA
Product Details
MotoBatt being a premium Absorbed Glass Mat battery is superior by design. AGM batteries have been used in demanding military and off -road applications for many years. The sealed, glass mat design has many longevity and reliability based benefits.
Each plate in the battery is wrapped in a fiberous glass matting which not only absorbs all liquid electrolyte but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can breakdown the plate and cause short circuits between the plates or break plate welds which result in battery failure. The thick, heavy plates used in MotoBatt designs really make the difference here.
AGM batteries also have a much lower inherent self discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the MotoBatt battery can also discharge more deeply and recover repeatedly under vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling, without pre-mature failure.
Your Motobatt is a Factory Activated battery. It comes to you pre-conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early PowerSports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing; common with standard flooded battery types.
MOTOBATT BATTERIES ARE AVAILABLE VIA COURIER DELIVERY AS THEY CONTAIN NO LIQUID ACID!
Specification
| MB Item Number | MB3U | |
|---|---|---|
| Voltage | 12 | |
| CCA | 50 | |
| Capacity (10HR) | 3 | |
| Weight | 1.34kg / 2.95lbs | |
| Dimensions (in / mm) | L: 3.86 (98) W: 2.20 (56) H: 4.33 (110) | |
| Assembly Figure Terminal Locations | 2 |  |
| Terminal | 2, 10x15 (Threaded Flag) | |
| Screws | 2, M5x7 (Part#MPS1) | |
| Allen Wrench | 1, 3x3 (Part#MPAK1) | |
| Terminal Caps | NA | |
| Spacer | None | |
| Case Color | Yellow | |
| Cap Style | NA | |
| Replaces | YB3L-A, YB3L-B | |
Product Status
Condition : Brand New
Availability: In stock in Melbourne, Australia (Sorry, pickup is not available)
Fitment
- HONDA XL200R (83-84) - 200CC
- HONDA XL250R (82-87) - 250CC
- HONDA XL350R (84-85) - 350CC
- HONDA XL500R (82) - 500CC
- HONDA XL600R (83-87) - 600CC
- HONDA NS50F (90) - 50CC
- YAMAHA XT250 (84) - 250CC
- YAMAHA XT350 (85-00) - 350CC
|
|
