The TAS5613 is a high performance analog input Class D amplifier with integrated closed loop feedback.
Its drive capacity is up to 300W. 4 ohm load speaker when powered from a single 36V supply. Unlike conventional Class D amplifiers, the distortion curve increases only when the output level enters clipping.
Use original TAS5613, TL072
Bluetooth module uses Qualcomm QCC3003 Bluetooth 5.0 module
Bluetooth DAC decoder chip uses Texas Instruments PCM5102A
Precision resistors are used for the resistors to ensure a good signal-to-noise ratio.
The PCB adopts 1.6mm thick double-sided sheet, 2.0 oz copper thickness, and the whole process of tin-spraying ensures the good passing performance of the current. First-class PCB quality.
With fully enclosed dust-proof potentiometer, the performance is more stable and more durable than ordinary potentiometers!
The red-grey ring audio special high-current inductor is used to ensure the sound is crisp and powerful.
It adopts all-aluminum chassis, and the surface of the chassis is all processed by brushed oxidation coloring process!
The way to connect to Bluetooth is the same as that of a normal device!
Input method: analog and Bluetooth input function. When two modes are input at the same time, the Bluetooth input is prioritized. After the Bluetooth connection, the RCA input is automatically disconnected; when the analog input is required, please turn off the Bluetooth function of the mobile phone before switching.
Basic parameters:
1. Working method: Class D
2. Quiescent current: 65mA
3. Work efficiency: 88%
4. Output power: 4 ohm speaker, 150W+75W*2, at this time THD+N>=10%
5. Frequency response: 20Hz to 20KHz
6. Dynamic range: >100 dB
7. Signal to noise ratio: 100dB (A-Weighted)
Load range: 4-8 ohm
8. Working voltage: DC24V-36V (Plug:5.5x2.5)
9. Potentiometer function: from left to right Bass adjustment, treble adjustment, volume adjustment
10. Size: 180*100*43mm