Vinyl Transfer Graphic Application
Step
1
Clean the area thoroughly. Use rubbing alcohol or soap and water.
Be careful to not use any cleaner that will leave behind a residue that
may prevent the decal from sticking properly.
Step 2
Firmly rub a squeegee or credit card across the clear transfer tape. Remove any
air bubbles that may have formed.
Step 3
Peel the white paper backing off of the decal. If the decal stays attached to
the backing, replace the paper backing and slowly repeat Step 2.
Step 4
Place the decal onto the surface and rub firmly with a squeegee or credit card
at an angle. Remove any air bubbles by rubbing them out towards the edges
of the decal.
Step 5
Slowly peel the clear transfer tape off at an angle, being careful not to pull
the decal off the surface. If decal pulls away from the surface slowly replace
the transfer tape and repeat Step 4.
Contact us for custom graphic inquiries! Message SwingWingGraphics on eBay!