Welcome to our page!
For sale we have our custom made 5 x 112 GOLF MK7
Wheel Spacers sold in pairs with 10 x 40mm thread M14 x 1.5 HT wheel bolts
LARGER 150mm outside diameter billets for the new GOLF MK7 Hubs!!
These spacers are designed to fit a 57.1mm HUB and wheel bore
Please note these will only fit the front axle
Radius bolts are sent out with this listing
for original/oem wheels
Spacers are 12mm wide giving 24mm overall increase across the axle.
WE ALSO SELL THESE IN BLACK WITH 10 BLACK RADIUS BOLTS
CHECK THEM OUT HERE eBay Item ID: 123677846550
All of our custom made spacers and adapters are manufactured from 6082 billet Aluminium in our Barnsley HQ
One of
the most cost-effective mods on the market and easy to fit in 7 steps
- Simply unbolt your wheel and
remove.
- Wire brush and wipe the bore
and wheel hub clean, (must be dirt/rust free)
- Apply a little copper grease
or similar to stop the faces sticking together.
- Slide the spacer on to your
existing hub.
- Check the spacer is sitting
flush against the original hub with no visible gap
- Gently position the wheel on
to the spacer spigot taking care not to damage the machined surfaces.
- Secure the wheel with the
extended bolts and torque them to the required spec.
Watfields
Precision Engineering also manufacture custom parts as well as wheel spacers
and adapters.
All our wheel spacers are manufactured
from material sourced in the UK and are produced by Watfields Precision
Engineering UK LTD. Visit www.watfields.com
Please
contact us to discuss any enquiries you may have