Unleash the tone of your Blues Deluxe, this kit works for the Re-Issue Blues Deluxe that is made in Mexico, if you have an original Blues Deluxe made in the USA please see my listing for that amp. The Blues Deluxe in its short life has received a lot of acclaim, it sounds good and is pretty reliable, other than a couple common problems. After these mods your amp will sound fantastic and be more reliable. The classic Fender tone is released through these changes. The flabby bottom darkness is gone, what you get is full warm classic tone with nice top end sparkle. Complete kit with detailed instruction book with photo's includes all the following mods. This Mod kit is for the current re-issue Made in Mexico version.

Please Note: For the best improvements in the tone and reliability of your amplifier, we recommend that you purchase both the "Recap Kit" and "Complete Kit" that we offer separately (or together in the "Supreme Mod Kit"). These kits upgrade your amplifier in unique ways and none of the parts are duplicated between the "Recap Kit" and "Complete Kit."

Tone Stack - Get rid of that farty bottom, honky mids, and lack of clarity. High quality WIMA caps with corrected values for the Bass and Mid Cap and corrected value for the slope resistor.  What about the Treble cap? replace the cheap ceramic cap with a high quality Silver Mica cap. The result is an amp that sounds huge and warm with nice top end sparkle, not dark and burried in the mix.

Twin Mod - Fix the mids on the amp and get rid of that flabby bottom. This mod enables you to take all the mids out of the tone allowing more flexibility and versatility. This is accomplished with just a short jumper wire but the result is far better control of your tone.

Brightness - Like to play at low volumes but find the amp too dark? The brightness mod adds sparkle to your tone at low volumes. As you turn your amp up the brightness mod looses its effect so the amp never sounds brittle at high volumes.

Power Stiffening - Doubles the capacitance in the first filter stage, this reduces hum and increases reserve power for solid bass and better transience for incisive picking, This mod gives the amp the extra torque it needs to push through strong when you are playing hard. This also takes some stress off the output transformer increasing its life span.

Lead Master Volume - Ever wonder why this amp gets extremely loud after you turn it up past 2. Fender uses a linear taper pot for the Master Volume in the reissue Blues Deluxe when it should be an audio taper. This mod gives you usable control of the drive channel so you can get good tone without playing at stadium volume.

Volume - And to give even more control of your clean volume replace the Volume pot which widens the available clean volume, but leaves plenty of room to turn it up for warm overdrive.

Plate Load Resistors - Replace all the plate load resistors with 5% 1/2 Carbon Comp resistors. This amp can develop a loud crackle/static that is caused by the plate load resistors. This mod fixes or prevents this problem and using the same carbon comp resistors found in vintage and boutique amps you add rich harmonic overtones.

Reverb Mod - Why does the reverb in this amp become a complete wash after turning it up past 3 especially at low volumes? This mod makes the reverb more controllable, fuller, and more natural. This is an easy mod that is nothing more than clipping one wire and replacing one cap but the result is amazing.


Global Master Volume Mod - This mod allows the Master Volume to work on both the clean channel and the drive channel.

Switchcraft Input Jacks- Your input jacks are soldered directly to the circuit board, apply some tension when the amp is plugged in and you could cause major damage to the circuit board in the amp. This mod gets rid of the wimpy plastic input jacks and replaces them with high quality metal switchcraft jacks that are panel mounted and NOT directly soldered to the circuit board. Included is a shoulder washer and isolation washer so the input jacks do not ground directly to the chassis and prevents ground loops. The jacks come pre-wired with high quality, Teflon Coated, Silver Plated Copper Core wire. The solder I use is Silver bearing. This is the same quality you will find in high end boutique amplifiers costsing thousands of dollars. Newer Blues Deluxe amps have a better quality Neutrik input jack which are better than the older amps but they are still attached directly to the PCB.

Proper Lead Dress - Take a look inside a boutique tube amp and you will see all the wires carefully twisted and placed for greatest reduction in oscillation and noise. The Blues Deluxe has all the internal wires zip tied together. I give clear instructions on dressing the leads inside the amp for optimal performance, this results in lower noise and less chance for oscillation.

Included in the kit is all the components necessary to get your amp in top shape and the detailed instructions to make the changes easy. If you have a basic understanding of electronics and soldering skills you can do these mods in less than an hour.

Reviews:

*Just wanted to let you know that today I installed the Hot Rod Dlx "ultimate mod" kit I purchased from you on 19th Feb in my Hot Rod Dlx. The result has been, in a word, SENSATIONAL. The difference is like night and day. Installing these mods has taken a pretty decent mid price combo and raised it to the level of boutique quality tone.


*Your instructions were clear and concise, and the results spectacular. Bravo on a wonderful product

WARNING: Performing these modifications WILL void the warranty on your amplifier. Working on amps can be deadly if you do not take proper precautions. Follow these instructions very carefully. If you are at all unsure of your ability to perform these modifications STOP and take your amp to a professional to be modified. You can also send your amp to me for modification.

 

No Warranty: This kit and the instructions included do not include any warranty of any kind. The modifications to your amplifier are at your own risk and you agree to completely hold harmless the seller of this kit against any and all claims. Tube amplifiers contain parts that operate at very high temperatures and deadly voltages. If you are not sure of your abilities to perform these modifications then do not perform them.


All orders are processed within three business days, however, international shipments may take up to six weeks depending on customs.


 

 






Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.