Combustion Leak Tester Kit



Description


  •  Fast, economical and accurate method to test for combustion gas leaks into the cooling system
  • Works on petrol, diesel and LPG engines
  • Positive proof that a leak is present when the tester fluid changes colour on detection of CO gas trapped in the vehicle's coolant - if there is a hairline crack in the cylinder head, engine block or damage to the cylinder head gasket, the test fluid turns yellow or green
  • 30ml test fluid, enough for 15 applications (2ml per test)


How does it work?

In the case of a damaged gasket under the head or the head itself, part of the combustion gases containing CO goes to the cooling system, at this point they react with the liquid and change its colour. 

Performing the test:

1.    Fill the device with reaction fluid to the level just below the chambers (approx. 2ml), as shown in the photo below.


                               


2.    Connect the tester to the opening of the expansion tank or radiator.

3.  Start the engine (preferably already warm), bring it to a higher speed to obtain a higher combustion pressure.

4.  Let the engine run at a slightly increased speed and observe the behaviour of the reaction fluid (it should be moving and allowing bubbles of air through).

5.   Changing the colour of the reaction fluid to yellow or green within a few minutes indicates a damaged gasket under the head or damage to the head itself. Do not perform the test for longer than 5 minutes, as heat is harmful to the reaction fluid.

6.    After the test has been completed, carefully remove the device. The used test fluid should be disposed of, even if the test result was negative. We would never recommend using any combustion leak detector fluid twice, as this may affect the accuracy of the test.


      The set includes:

  • CO reaction fluid - 30ml 
  • Test tube
  • Sealing adapter - rubber bung with diameter of approx. 37mm (narrow end) and 41mm (wide end). ***Please note that although it fits most cars, we recommend checking the size of the inlet in your car before placing an order.***
  • Operating instructions


Shipping

Items will be sent via Royal Mail 1st Class Standard or Recorded Services, depending on your selection when placing order. We aim to dispatch all items within one working day of receiving clear payment (excluding weekends and public holidays). Please email us if you have any urgent queries - we are here to help.