Never Get Caught Out with a Dead Battery Again!
Product Description
The iDRIVE Australia Bluetooth Battery Monitor is the easiest way to check the health of any vehicles battery, starter and charging system. The iDRIVE Australia Bluetooth Battery Monitor is a simple, easy to fit accessory that monitors your vehicle's current battery charge level and relays this information to your Android or iOS tablet or phone. You can test your vehicle's cranking system, record your trip duration and display and store historical data, all from the palm of your hand!
- Dimensions (L) 55mm (W) 35mm (H)16mm
- Connector Lead Length -195mm (each)
- Input Voltage: 6-20V
- Compatible for 6 & 12 volt batteries
- Weight 100g
Benefit of the iDRIVE Australia Bluetooth Battery Monitor:
- Wireless battery monitoring via mobile device
- Monitor multiple batteries with the one app
- Bluetooth connectivity , free app for iOS & Android (Battery Monitor BM2)
- Receive notification of your battery condition via the app
- Short circuit and reverse connection protection
- Data stored for up to 31 days if out of sync
- Review and store historical data
- Compatible with all 12-volt vehicle batteries
- Records trip duration
- Simple, cheap and effective protection
Multiple battery monitors can be named and monitored from the one device, so you can keep an eye on an entire family of cars, check that second battery in your dual battery setup or even the one in your caravan. The battery monitor has the ability to check the vehicle charging system voltage, to give an early indication of any alternator issues if the vehicle battery is going flat when it shouldn't. You can setup notifications for periodic notifications of your batteries condition and even schedule regular tests to check your batteries integrity.
Another very useful feature is the Deep Cycle State of Charge Notification: Two adjustable State of Charge alarms (defaults are 50% and 70%) to let you know when your deep cycle battery AGM, GEL, Lead Crystal is getting to dangerously low levels. A must have for your 4wd, Caravan, Boat, Camper Trailers and more.
Also using the App you can perform a crank test, this will test the voltage level during the start sequence of your car. Usually if the voltage is 9.6 or higher, everything is ok. If it’s lower than 9.6 volts, it may indicate abnormalities such as ageing or a damaged battery. The battery charge level is recorded everyday and can be formulated into a graph over time so that you can see any trends indicating potential failure coming before it’s too late.
To install, simply attach the monitor black connector to the battery negative terminal and the red connector to the positive terminal. Then Scan the QRcode or search "BM2" in your app store on your personal device. install the application and stand within 5 metres of the battery monitor, turn on your Bluetooth and open the app on your device. The battery monitor should automatically connect with your phone and the voltage will show on your screen.
We accept payment by any of the following methods:
Internet Transfer, Bank Deposit and all Major Credit Cards through Paypal
If you are making a bank payment, pleave leave only your exact ebay username as a reference (otherwise your payment cannot be cleared)
We offer FREE shipping for most products and metro area, however, for NT, QLD North, WA and other country area, surcharge could be required!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday
Pick-up is available on weekdays from 10:00 to 5:30PM and saturday by appointment
Beyond Outdoor is not directly liable for any loss and/or damages during delivery.
Never Get Caught Out with a Dead Battery Again!
Product Description
The iDRIVE Australia Bluetooth Battery Monitor is the easiest way to check the health of any vehicles battery, starter and charging system. The iDRIVE Australia Bluetooth Battery Monitor is a simple, easy to fit accessory that monitors your vehicle's current battery charge level and relays this information to your Android or iOS tablet or phone. You can test your vehicle's cranking system, record your trip duration and display and store historical data, all from the palm of your hand!
- Dimensions (L) 55mm (W) 35mm (H)16mm
- Connector Lead Length -195mm (each)
- Input Voltage: 6-20V
- Compatible for 6 & 12 volt batteries
- Weight 100g
Benefit of the iDRIVE Australia Bluetooth Battery Monitor:
- Wireless battery monitoring via mobile device
- Monitor multiple batteries with the one app
- Bluetooth connectivity , free app for iOS & Android (Battery Monitor BM2)
- Receive notification of your battery condition via the app
- Short circuit and reverse connection protection
- Data stored for up to 31 days if out of sync
- Review and store historical data
- Compatible with all 12-volt vehicle batteries
- Records trip duration
- Simple, cheap and effective protection
Multiple battery monitors can be named and monitored from the one device, so you can keep an eye on an entire family of cars, check that second battery in your dual battery setup or even the one in your caravan. The battery monitor has the ability to check the vehicle charging system voltage, to give an early indication of any alternator issues if the vehicle battery is going flat when it shouldn't. You can setup notifications for periodic notifications of your batteries condition and even schedule regular tests to check your batteries integrity.
Another very useful feature is the Deep Cycle State of Charge Notification: Two adjustable State of Charge alarms (defaults are 50% and 70%) to let you know when your deep cycle battery AGM, GEL, Lead Crystal is getting to dangerously low levels. A must have for your 4wd, Caravan, Boat, Camper Trailers and more.
Also using the App you can perform a crank test, this will test the voltage level during the start sequence of your car. Usually if the voltage is 9.6 or higher, everything is ok. If it’s lower than 9.6 volts, it may indicate abnormalities such as ageing or a damaged battery. The battery charge level is recorded everyday and can be formulated into a graph over time so that you can see any trends indicating potential failure coming before it’s too late.
To install, simply attach the monitor black connector to the battery negative terminal and the red connector to the positive terminal. Then Scan the QRcode or search "BM2" in your app store on your personal device. install the application and stand within 5 metres of the battery monitor, turn on your Bluetooth and open the app on your device. The battery monitor should automatically connect with your phone and the voltage will show on your screen.
We accept payment by any of the following methods:
Internet Transfer, Bank Deposit and all Major Credit Cards through Paypal
If you are making a bank payment, pleave leave only your exact ebay username as a reference (otherwise your payment cannot be cleared)
We offer FREE shipping for most products and metro area, however, for NT, QLD North, WA and other country area, surcharge could be required!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday
Pick-up is available on weekdays from 10:00 to 5:30PM and saturday by appointment
Beyond Outdoor is not directly liable for any loss and/or damages during delivery.
