Brand New


RUGGED MADE for HIGH POWER



HIGH GAIN

HIGH POWER


CA-5Wave-5kW  Broadcastmachines


11dbi = 5x5/8 Wave Antenna


lenght = 6,5 Metres Vertical

 

High Power Design, up to 5000 Watt system

With DIN 7/16 Connector 

+

HIGH Power Loading

 

Do You need Better GAIN for your AMATEUR RADIO Antenna System ???

This Antenna will give you better gain and Stronger signal than any other 1/4 wave model, This one is the 5/8 Wave model, It gives you 9 times More GAIN than current ¼ wave design

 

  • This is the 5/8 wave FM broadcast transmitter antenna.
  • This FM antenna will outlast your FM transmitter; it is built to withstand any weather.
  • You've seen this design a thousand times in antennas because it is tried and true and used by millions of communications professionals around the world.
  • You will get the same range as any other FM transmission antenna in typical urban settings including FM antennas that make wild claims and cost far more. You'll get longer range usually because this FM antenna can be mounted higher and in the clear with far less expense.
  • You'll be pleased with how much this FM antenna blends in your surroundings; this is the lowest-profile FM antenna you will find.
  • Whether your transmitter is very low power or high power up to 1000 watts,, this FM antenna will work exactly as designed to give you long range and a solid signal.
  • Your FM transmitter will work at its peak with this FM antenna regardless of whether it is a hobby FM transmitter such as a Ramsey or very expensive professional LPFM transmitter.
  • Works great in any FM mode: Stereo, mono, DAB, digital, SCA, or whatever your transmission mode may be.
  • You will be very glad you chose this FM antenna! Check the feedback: hundreds of users all over the world are transmitting with it right now!

 

Quality Manufacturing

 

This is a professionally manufactured 5/8 wave FM Broadcast antenna.  The antenna is manufactured to operate from 87.5 – 108 MHz which is the domestic FM broadcast band. It does have a 2 MHz bandwidth so it will have to be trimmed, but tuning instructions are included. If you are using less than 1/2 watt then you will not have to tune the antenna unless you want to peak it.

 

Flexible Mounting 

It can be setup permanently or used for a temporary FM broadcast event, meaning that it is very light and can be easily moved. The groundplane elements can be removed in mere moments by loosening 2 bolts and the radiator can be unscrewed if necessary. This FM antenna is built to give the longest FM broadcast range possible when installed correctly. The four elements and the radiator have protective tips which allow it to be used inside. No detail has been left off this outstanding antenna.

Built for FM Broadcasting

The 5/8 wave FM broadcast transmitter antenna is the best antenna for the simple FM setup. A 5/8 wave design is superior for FM transmitting over a 1/2 wave dipole because it doesn't require a balun to reach 50 ohms. The signal is more consistent as well. A half-wave FM dipole antenna is merely a 5/8 wave FM antenna with only one groundplane element which is fine for FM reception, but not up to the standards of FM broadcasting. This FM antenna is superior to the FM dipole antennas that all cost more than this FM broadcast transmitter antenna.

Easy Installation

It can be easily mounted on a light stand, microphone stand, windsock pole, or just about any pole. It can be mounted to a horizontal crossbar or railing or to a vertical pole with the included hardware. Height is the key; mount the antenna as high as is possible for maximum range. A good shielded 50 ohm cable no less than RG8 is recommended for ultimate range.

 

 

 

 

 

ELECTRICAL DATA

Frequency range

140-150 MHz

Please give your specific Ferquency

Bandwidth is 0,5 Mhz

Impedance

50 W

Connectors

DIN Type

Max Power

5kW

VSWR

 < 1.5 : 1

Please Give the Frequency, we will tune it for you

Polarization

Vertical

Gain

11 dBi



 

MECHANICAL DATA

Dimensions

155 x 155 x 650 cm

Net Weight

6 kg

Materials

Aluminium

High Temperature Insulator

Mounting

Vertical Direct Clamp

to Antenna Base Pipe


 
 
 
 
 
 

Postage by

 

FEDEX, EMS and DHL Express

Normaly 3-6 days delivery Time

 

FrequencyRF

-

Giant Communication 

 

 

Giant Communication Deliver all Broadcast FM , TV and Amateur Radio Equipment , Please Ask if you have any Custom design requirement, We design and Manufacture FM Transmitter and TV Transmitter , High Power Amplifier from HF , VHF , UHF.

We also build any kind of Antenna system for HF , VHF , UHF , Yagi, Dipole, Log Periodic, Vertical , Panel and others 

For Bulk Purchase for special need, we do also offer our customer.

Please Ask for any Specification that you want , 

Please Be Wise for the purchase , this is the International Shipment, Buyer will need to pay for the Return ,  Thank you

 

 

 

      TERMS & CONDITIONS

·   Dear Buyer, Please Note that this item is exactlly like the picture, We took picture from our original Stock.

·   Serial Number might be different.

 

 

 

DELIVERY.

·   Dispatch of goods will be arranged through us. 

·   Packing is Good, we are in the Ebay Business for 20 years

·   We Use FEDEX and DHL Express , for Remote Area cases we will ask buyer.

·    If problems do arise, please contact us , and we will kindlly resolve any issues.

·   Postage with Trackable with Tracking Number

·  Please Be Wise , this is International Shipment, the unit will be carefully checked before we send it, we don't offer Return, but if customer want to return it, customer need to pay for the Postage return.

 

 

 

 

 

Thank you

 

 

 

 

SELLER CODE =

BB-A