Compatible With:

H7


Input Power:

L/36W, H/36W

Luminous Flux:

8000LM

Voltage:

DC 9-32V

IP Rate:

IP65

Light source model:

2 sided CSP/ COB chips

Beam Angle:

360 Degrees

Heat Control

Aluminum shell base including Turbo cool fan

Aviation aluminum 6063

Smart Efficient Cooling System, Built-In Cooling Fans For Fast Heat Dissipation

Operating Temperature:

-40 - +80°C

The heating temperature is low- this will protect your car

(Xenon working temperature up to 800 ° -1000 °, the main reason for the car ignition)

Sealed Housing:

Dustproof and Waterproof

Colour Temperature:

6500K

Longlasting operating Life:

>30000hrs

Number of Bulbs

2

To Fit:

Head Lights Kit

Placement on Vehicle:

Front Left, Front Right


Product Manual with fitting instructions

included

INSTALLATION :

For video search YouTube for tittle below:

Led Headlight Conversion Kit Review And Installation

Unplug the plastic wiring connector from the factory-installed bulbs and remove them

Preserve them in a safe space for possible future use

Remove the rubber Dust Boot/ back cover

Release the retaining the metal spring and remove the halogen bulb

Remove the plastic black ring shown on the photo from LED lamp (twist and pull up) and FIRST INSTALL just the plastic ring and lock it in with the retaining metal spring. If there is no spring and you need to lock the bulb with a clip you will need to BUY SEPARATELY from a different seller LED bulbs Holder headlight ADAPTER clip/Base Retainer. There are different types of the clips. Its better to double check with the car factory bulb retainer clip and compare with the adapter to be sure it fits. When the ring with the adapter is secured you can push through the LED lamp and twist so it stays it place .

Put the rubber boot /cover back.

When the ring is secured you can push through the LED lamp and twist so it stays it place

Led Headlight Conversion Kit Review And Installation - YouTube

Video will open in a new window
Using the eBay App? Paste link into a browser window:


Side LED Light 501 (W5W)

2 pcs NOT included in the set

Brightness enhance up to 200%,6500k pure white,

Non-destructive and quick installation, clearer beam pattern without dazzling

100% Integrated Design, Plug and Play.

Few vehicles may require load resistors to stop flickering or fix the error message. It's not the quality problem, in such case you will need to install the decoder to avoid the error code or blinking.