Wras Approved ( Drinking Water) T Handle Ball Valve BSP Male /Fem Female /Female Full Flow T Handle Ball Valve 1/4 BSP TO 1" BSP UP TO 40 & 50 BAR PRESSURE RATED ZINC PLATED BRASS Suitable for Drinking Water * Air * *Low Pressure Hydraulics* *Hot/Cold Water ( up to 170c)* *Gas Oil * *Gasoline* *Kerosene* Tech Data 1 Screw Zinc-plated steel Fe CB4 2 T handle Varnished aluminium O-Ring 1 VITON ® O-Ring 1 NBR Stem 1 Brass CW614N End adapter Nickel-plated brass CW617N Seat P.T.F.E. Ball Chrome-plated brass CW617N Body Nickel-plated brass CW617N Female-Female & Male-Female threads. T handle in aluminium.
Body in nickel-plated brass. Minimum and maximum working temperatures:
-20°C, 150°C in absence of steam. Female threads: ISO 7/1 Rp parallel
(equivalent to DIN EN 10226-1 and BS EN 10226-1). Pressure up to 50 Bar 1/4 to 1/2 40 bar 3/4 & 1" Temp Range -20c to 150c ECOLOGICAL BALL VALVES IN
COMPLIANCE WITH THE NEW
EUROPEAN REGULATION FOR
DRINKABLE WATER.
- APPROVED IN ACCORDANCE
WITH STANDARD EN 13828 AND
CODE OF PRACTICE DVGW W
570 FOR THE DISTRIBUTION OF
WATER INTENDED FOR HUMAN
CONSUMPTION.
- EQUIPPED WITH A BALL
DESIGNED TO AVOID THE
STAGNATION OF WATER AND
EVENTUAL PROLIFERATION OF
BACTERIA INSIDE THE VALVE  What is a WRAS Approval?Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’. A WRAS approval is an easy way to demonstrate compliance for a material or water fitting, other approval schemes are available. WRAS Product Approval: Whole products such as valves, boilers & showers undergo mechanical and water quality testing. This type of approval demonstrates compliance with requirements of the regulations and bye laws, provided the fitting is installed according to any conditions given with the approval. WRAS Material Approval: Non-metallic materials & components, such as rubber sheet material & ‘O’ rings, undergo testing only for their effects on water quality. This type of approval demonstrates that the non-metallic material/component does not itself contaminate the water and therefore satisfies this particular requirement of regulations and bye laws. Please read our feedback we are determined to supply quality Pneumatics to you the customer |
Please read our feedback we are determined to supply quality Pneumatics to the customer We are an established Pneumatic supplier Family owned and run based in the north west able to supply all types of Pneumatic s including product support, Machine and panel design and build, With our own Skilled and experienced Engineers Any Questions Please Contact Us Through eBay or See Our Business Contact Information On eBay, On the Bottom Left Of Each Listing for any technical advice or product information and we will be glad to help
| ||||||||||||||||||||||||
