The original Biemme screens were made from 2mm plastic. Ours are made from 4mm acrylic-coated ABS material and come in a choice of high gloss black, white, silver or carbon effect and can be painted to match your scooter for that bespoke look.
Does it do anything?
It improves aerodynamics, speed and riding comfort simply by deflecting some of the wind that would normally hit you in the chest. You should expect 1 or 2 mph improvement in top speed as a result. This is cheap and effective tuning. Also the screen provides a place behind which you may hide additional instruments or a GPS unit without spoiling the look of your scooter.
Assembly
It's hardly an IKEA sideboard but there is a minor bit of home assembly required, the clear 'cockpit' and laser-cut stainless trim (peel off the backing paper if you want a polished finish to your trim, or use the other way up for a matt finish) needs attaching to the main part of the screen using the supplied 7 stainless steel bolts and Nyloc nuts. The metal trim sits uppermost.
Wrap it
Before fitting simply wrap a length of quality electrical tape around your headlight rim and any painted areas that the screen touches. The tape serves to protect the paintwork.
Adjustment
The screen has been trimmed for clearance to the legshields but it can be trimmed further at home if needed to clear any accessories you have. You can trim the ABS with a Dremel or a hand file.
Fitting
Fitting is simple, remove the 2 screws at the side of your chrome headlight bezel, (there are also 2 rubber spacers included, they fit in the space between the screw holes) then the screen simply slides over the bezel and the replacement longer stainless screws and washers are put back to hold it in place. Not only is it quick and easy to fit but it also means taking it off is simple when you need to get into the headset to change a bulb. It’s usually easier to get somebody to help when fitting to help hold the screen whilst you line the screw holes up.
FEATURES:
Designed and made in the UK
Exclusive SLUK product
Simple to fit
Quick to remove: for ease of changing bulbs
Made from tough ABS plastic (as used for most motorcycle fairings) it can be easily trimmed, sanded or painted
Produced in racy high-gloss finish (white/black/silver/carbon effect)
Fully packaged and ready to fit after simple assembly
Shipped direct from the UK manufacturer
Made to order but usually shipped within 3 days
Postage £6.95, World £15
These items are made to order but delivery is usually within 5-7 days in the UK
* SLUK uses 95% recyclable material when packing our products *