ZOMBIE COMPONENTS
THE LARGEST IXIA RESELLER ONLINE
Ixia Optixia LSM1000XMVR16-01, 16-pt Dual Media Gigabit Ethernet Load Module
Specifications
Load ModuleLSM1000XMVR16-01
LSM1000XMVR12-01
LSM1000XMVR8-01
LSM1000XMVR4-01
Connector TypeRJ45 or SFP
Connection SpeedAuto-negotiable 10/100/1000 Mbps Ethernet over copper and Gigabit/100FX Ethernet over fiber
Port CPU / Memory400MHz / 256MB
Number of Ports16 / 12 / 8 / 4
Maximum Ports per Chassis192
Layer 2-3 Routing Protocol and EmulationYes
Layer 4-7 Application Traffic TestingNo
Capture Buffer per Port8MB
Number of Transmit Flows per Port (sequential values)Billions
Number of Transmit Flows per Port (arbitrary values)32K
Number of Trackable Receive Flows per Port64K
Number of Stream Definitions per Port256 in Packet Stream Mode (sequential) or Advanced Stream (interleaved) modes. Each Stream Definition can generate millions of unique traffic flows.
Transmit EngineWire-speed packet generation with timestamps, sequence numbers, data integrity signature, and packet group signatures
Receive EngineWire-speed packet filtering, capturing, real-time latency for each packet group, data integrity, and sequence checking
User Defined Field (UDF) FeaturesFixed, increment or decrement by user-defined step, value lists, range lists, cascade, random, and chained
Table UDF FeatureComprehensive packet editing function for emulating large numbers of sophisticated flows. Up to 32K table UDF entries are supported on the LSM1000XMVR ports.
Filters48-bit source/destination address, 2x128-bit user-definable pattern and offset, frame length range, CRC error, data integrity error, sequence checking error (small, big, reverse)
Data Field (per stream)Fixed, increment (Byte/Word), decrement (Byte/Word), random, repeating, user-specified up to 13K bytes
Statistics and Rates (Counter Size: 64-Bit)Link State, Line Speed, Frames Sent, Valid Frames Received, Bytes Sent/Received, Fragments, Undersize, Oversize, CRC Errors, VLAN Tagged Frames, User-Defined Stat 1, User- Defined Stat 2, Capture Trigger (UDS 3), Capture filter (UDS 4), User-Defined Stat 5, User-Defined Stat 6, 8 QoS counters, Data Integrity Frames, Data Integrity Errors, Sequence Checking Frames, Sequence Checking Errors, ARP, and Ping requests and replies
Error GenerationCRC (Good/Bad/None), Undersize, Oversize
Packet Flow StatisticsReal-time statistics to track up to 64K packet flows with throughput and latency measurements on the LSM1000XMVR16/12/8/4 load modules.
Latency Measurements20 ns resolution
IPv4, IPV6, UDP, TCPHardware checksum generation
Frame Length ControlsFixed, random, weighted random, or increment by user-defined step, random, weighted random
Operating Temperature Range41°F to 86°F (5°C to 30°C), ambient air [1]
ApplicationsIxNetwork: Integrated Layer 2-3 data/control plane performance and functional testing, supporting routing, bridging, MPLS, and multicast protocols. 
IxAutomate: Automation environment providing pre-built tests for Layer 2-3 data and control plane testing 
IxExplorer: : Layer 2-3 wire-speed traffic generation and analysis
Flexible Packet Generation

Each Ixia GE XMVR test port is capable of generating precisely controlled network traffic at up to wire speed of the network interface using Ixia’s IxExplorer test application. Up to millions of packet flows can be configured on each port with fully customizable packet header fields. Flexible header control is available for Ethernet, IPv4/v6, IPX, ARP, TCP, UDP, VLANs, QinQ, MPLS, GRE, and many others. Payload contents can also be customized with incrementing/decrementing, fixed, random, or user-defined information. Frame sizes can be fixed, varied according to a pattern, or randomly assigned across a weighted range. Rate control can be flexibly defined in frames per second, bits per second, percentage of line rate, or inter-packet gap time.

 

Real-Time Latency
Packets representing different traffic profiles can be associated with Packet Group Identifiers (PGIDs). The receiving port measures the minimum, maximum, and average latency in real time for each packet belonging to different groups. Measurable latencies include:
  • Instantaneous latency and inter-arrival time where each packet is associated with one group ID
  • Latency bins, where PGIDs can be associated with a latency range
  • Latency over time, where multiple PGIDs can be placed in "time buckets" with fixed durations
  • First and last time stamps, where each PGID can store the timestamps of first and last received packets
 

 

Transmit Scheduler
Two modes of transmission are available - Packet Stream and Advanced Stream Scheduler:

 

Packet Stream Scheduler In Packet Stream Scheduler mode, the transmit engine allows configuration of up to 256 unique sequential stream groupings on each port. Multiple streams can be defined in sequence, each containing multiple packet flows defined by unique characteristics. After transmission of all packets in the first stream, control is passed to the next defined stream in the sequence. After reaching the last stream in the sequence, transmission may either cease, or control may be passed on to any other stream in the sequence. Therefore, multiple streams are cycled through, representing different traffic profiles to simulate real network traffic.

Advanced Stream Scheduler In Advanced Stream Scheduler mode, the transmission of stream groupings is interleaved per port. For example, assume a port is configured with three streams. If Stream 1 is defined with IP packets at 20% of line rate, Stream 2 is defined with TCP packets at 50% of line rate, and Stream 3 is defined with MPLS packets at 30% of line rate, data on the port will be transmitted at an aggregate utilization of 100% with interleaved IP, TCP, and MPLS packets.

Extensive Statistics
  • Real-time 64-bit frame counts and rates
  • Spreadsheet presentation format for convenient manipulation of statistics counters
  • Eight Quality of Service counters (supporting 802.1p, DSCP, and IPv4 TOS measurements)
  • Six user-defined statistics that use a trigger condition
  • Extended statistics for ARP, ICMP, and DHCP
  • Transmit stream statistics for frame counts and rate
  • External logging to file for statistics and alerts
  • Audible and visual alerts with user-definable thresholds

 

Data Capture
Each port is equipped with 8 MB of capture memory, capable of storing tens of thousands of packets in real time. The capture buffer can be configured to store packets based on user-defined trigger and filter conditions. Decodes for IPv4, IPv6, UDP, ARP, BGP-4, IS-IS, OSPF, TCP, DHCP, IPX, RIP, IGMP, CISCO ISL, VLAN, and MPLS are provided.

 

 

Data Integrity
As packets traverse through networks, IP header contents may change resulting in the recalculation of packet CRC values. To validate device performance, the data integrity function of Gigabit Ethernet XMVR modules allows packet payload contents to be verified with a unique CRC that is independent of the packet CRC. This ensures that the payload is not disturbed as the device changes header fields.

 

 

Sequence and Duplicate Packet Checking
Sequence numbers can be inserted at a user-defined offset in the payload of each transmitted packet. Upon receipt of the packets by the Device under Test (DUT), out-of sequence errors or duplicated packets are reported in real time at wire-speed rates. The user can define a sequence error threshold to distinguish between small versus big errors, and the receive port can measure the amount of small, big, reversed, and total errors. Alternatively, the user can use the duplicate packet detection mode to observe that multiple packets with the same sequence number are received and analyzed.

 

 

Routing/Bridging Protocol Emulation
Ixia's Gigabit Ethernet XMVR modules support performance and functionality testing using routing/bridging protocol emulation via the IxNetwork and IxAutomate applications. Protocols supported include IPv4/IPv6 routing (BGP-4, OSPF, IS-IS, and RIP), MPLS (RSVP-TE, LDP, L2 MPLS VPNs, L3 MPLS VPNs, and VPLS), multicast (IGMP, MLD, and PIM-SM), and bridging (STP, RSTP, MSTP). Medium scalable scenarios can be created emulating up to 100 routers advertising thousands of routes per test port. Up to wire-speed Layer 2/3 traffic can be automatically created to target routes and MPLS tunnels.

 

 

Tcl API
Ixia's Gigabit Ethernet XMVR modules are supported by a comprehensive Tcl Application Programming Interface (API). This API allows users to develop custom scripts, and integrate the modules into automated test environments.

 

Product Ordering Information

944-0010 LSM1000XMVR16-01
16-Port Dual-PHY (RJ45 and SFP) 10/100/1000 Mbps Ethernet Load Module for Optixia XM Series Chassis, CPU per port, 256MB processor memory; reduced performance and scalability – supports routing protocols. Does not include SFP transceivers.

944-0033 LSM1000XMVR12-01
12-Port Dual-PHY (RJ45 and SFP) 10/100/1000 Mbps Ethernet Load Module for Optixia XM Series Chassis, CPU per port, 256MB processor memory; reduced performance and scalability – supports routing protocols. Does not include SFP transceivers.

944-0031 LSM1000XMVR8-01
8-Port Dual-PHY (RJ45 and SFP) 10/100/1000 Mbps Ethernet Load Module for Optixia XM Series Chassis, CPU per port, 256MB processor memory; reduced performance and scalability – supports routing protocols. Does not include SFP transceivers.

944-0029 LSM1000XMVR4-01
4-Port Dual-PHY (RJ45 and SFP) 10/100/1000 Mbps Ethernet Load Module for Optixia XM Series Chassis, CPU per port, 256MB processor memory; reduced performance and scalability – supports routing protocols. Does not include SFP transceivers.

SFP-LX
SFP Transceiver - 1310nm LX

SFP-SX
SFP Transceiver - 850nm SX

SFP-CU 
SFP Transceiver - RJ-45 Copper converts a 1000Base-X optical Ethernet port into a 1000Base-T copper Ethernet port.

[1] The maximum operating temperature for these load modules lowers the maximum operating temperature to these limits when used in an XM2 or XM12 chassis.

ATTENTION PLEASE!


IXIA CLIENT SOFTWARE: The software provided on all Ixia items is the server software only. The server software has ixserver and ixplorer as the only desktop applications. The server application licensed features are accessed through various Ixia client applications that interact with the chassis server. 


You can download the Ixia client applications if you have online access with Ixia. These client applications are typically free from Ixia but you will need an Ixia logon account.  We offer a selection of these applications to our customers at no charge but the selection is incomplete.  We do not sell these with the servers as a package. Client application needs are the buyers responsibility, we do not guarantee that we will have all your needs though we will try to assist you if we can. We only guarantee the server applications as itemized in the listings.


In a single user environment you can set the client side GUI interface on a external PC or you can set them up on an application server when using a chassis in a multi-user environment to access and configure all the sub-license features included in a listing. Multiple chassis can be accessed in the client applications environment which allows you to use the licensed features of several chassis all at once in one interface.


WHAT YOU SEE IS WHAT YOU GET... What is included in this listing will be shown in the pictures. If you do not see an accessory  in the pictures and it is not specifically listed as included in the condition description or the listing description, the accessory is not included. Please read the descriptions completely for exceptions on this.


GENERAL REFUND POLICY You are covered with a full money back guarantee for at least 30 days or longer as specified in the listing, unless an item is indicated as "Sold as is - no returns".  We go beyond that by promising that if you are dissatisfied for any reason and if we cannot fix this with you, we will give you 100% of your purchase price back as a cash refund. This will include the original shipping costs if your dissatisfaction ​​​​​​​ is due to an issue with the item you bought being "Not as described".
​​​​​​​

ALL WE ASK IS THAT YOU CONTACT US FIRST AND GIVE US A CHANCE TO WORK THINGS OUT WITH YOU. PLEASE DO NOT LEAVE NEGATIVE FEEDBACK IF YOU HAVE NOT FIRST CONTACTED US TO FIX WHATEVER ISSUE YOU HAVE.


WE SHIP WORLD WIDE!

Store policies:


Shipping

​​​​​​​
Also please note that we may take up to 3 business days to ship from the time you paid for your order. Also, please keep in mind that weekends are not counted. So, if you place an order Friday night, we may not get it out until the following Wednesday (worst case scenario) though we ship as soon as we can. We also reserve the right to change the method of shipping selected at the time of purchase to an equivalent or better delivery service that best fits the item being delivered.


If you need a faster service, please tell us so we can adjust our priorities but please don't expect expedited service unless you ask us to do so first as our commitment is 3 days if you have not specifically asked for faster shipping.


We ship worldwide .. Some items may take up to 5 days to palletize and ship


Please note that the us mail (USPS) may not be an acceptable choice for international shipping due to package size and weight restrictions and export documentation requirements. If you chose USPS for your international shipment, you may be told you have to select FedEx or UPS or even DHL at a higher price due to the restrictions when using USPS. If you have a question on this, please confirm your shipping choice with us before placing your order.


International shipments may be delayed or cancelled due to EAR and ITAR export compliance requirements. The vast majority of our items do not need export licenses and can be shipped under ear99 and other exemptions. Items that do require export licenses should be indicated within the listing.


Returns

​​​​​​​
Unless indicated as "Sold as is no returns", you will have either 30 or 60 days to return your purchase, for any reason, if you are not 100% satisfied with your purchase. You can return the product for a full refund or exchange the product for another item, be it similar or not. The period of 30 or 60 days is listed for each item on the items listing page.


Any product you return must be in the same condition you received it and in the original packaging. All items are guaranteed to be "as described". Any item you feel is not as described in the listing; you can return it at our expense for a full refund regardless if the item is listed "as is no returns".


Warranty


Unless indicated as "Sold as is no returns", you will have either 30 or 60 days to return your purchase for a warranty claim at our expense for a full refund, a repair or a replacement. Some higher value items we will warranty beyond ebays 60 day maximum limit for normal listing. If you are interested in extending your warranty, ask us at the time of your purchase.


Data Privacy

​​​​​​​
We do not keep or share your information anywhere. Your information resides only on ebay and is only available to us for a limited time while we are interacting with you on an inquiry, order or a return, per ebays usage policies.


QUALITY CONTROL


Electronics in general, where possible items are tested. The value of an item greatly contributes to the amount or effort put into testing. It just isn't possible to test many low value items due to the time required and the expenses associated with it. Items that are not specifically tested in detail are visually inspected and reviewed for their operational status. When purchasing recycled items, it is reasonable to have varying quality and occasional failures. Just remember you are covered with a money back guarantee on most items. We want you to be happy above all other considerations.


Appliance parts. Used items are cleaned, clear plastics are hand polished to reduce visible scuffs or scratches. Paint chips are sometimes but not always repaired. Lime and rust deposits are removed to the best of our ability. Some minor repairs may be performed. Any exceptional wear will be noted in our description. We do our best to restore any used item but the final condition of the restoration is subjective to one's opinion. If you take issue with the items' condition, we promise to work with you to resolve this. Note that stock photos are often used and are not the exact item being sold. If you would like to request a different or an actual photo of an item you are interested in, please submit a request before buying.