New surface-mounted water meter - calibration 2022 - mounting accessories of your choice
In this offer there are not only water meters, but also many possible accessories.
Put together your individual shopping cart and then enjoy an uncomplicated installation.
Surface-mounted apartment/garden water meters are single-jet impeller meters which are designed to control water consumption. The meter is simply screwed between the pipe with 2 water meter screw connections or mounted on the outlet valve with a tap screw connection. You can find mounting accessories for all eventualities in our shop.
According to the law, you must use calibrated meters for all official measurements that you want to use for billing.
- Fully dry runner with magnetic transmission
- Chrome-plated brass housing
- Counter rotatable through 360 °
- for horizontal and vertical installation
- tamper-proof (with sealing eyelet)
- highest measuring accuracy
- absolute corrosion resistance
- with CE certification, EC approval
- Validity of the hot water meter calibration: 5 years
- Validity of calibration of cold water meter: 6 years
SCOPE OF DELIVERY, if placed in the shopping cart:
O Counter according to selection, always incl. 2 seals, 1 set for sealing and assembly instructions
O Replacement seal according to selected size and quantity
O Water meter screw connection (always incl. seal) according to selected size and quantity
O Splash water cover suitable for the water meter in the desired quantity
O Double screw connection ¾" internal thread x ¾" cap (always incl. 2 seals) according to the selected quantity
O Sealing clamp according to selected size and quantity
CORRECT PRODUCT SELECTION:
Before you order a meter, see the table below for the connection dimensions you need.
According to the law, cold water meters may only be used for cold water.
Hot water meters are universal meters and can be used for hot and cold water.
TECHNICAL SPECIFICATIONS:
length | mm | 80 | 110 | 130 |
Nominal flow rate Qn | m³/h | 1.5 | 1.5 | 2.5 |
Largest flow rate Qmax | m³/h | 3.0 | 3.0 | 5.0 |
Smallest flow rate Qmin | m³/h | 0.030 | 0.030 | 0.050 |
nominal size | DN // inches | 15 // 1/2" | 15 // 1/2" | 20 // 3/4" |
Connection thread | mm // inches | 25mm // 3/4" | 25mm // 3/4" | 35mm // 1" |