Kieninger model number QPA32. Also replaces Howard Miller model 354476.
PLEASE NOTE - THIS MOVEMENT IS SPECIFICALLY DESIGNED FOR USE WITH HOWARD MILLER GRANDFATHER CLOCKS THAT WERE ORIGINALLY BUILT WITH A HERMLE 2215 QUARTZ MOVEMENT WITH AN EXTRA LONG SHAFT. THESE MOVEMENTS WERE OFTEN CONSTRUCTED WITH A WOOD OFFSET THAT THE MOVEMENT WAS MOUNTED TO. THE OVERALL SHAFT LENGTH ON THIS MOVEMENT IS 52.5 MM, OR ABOUT 2 INCHES TOTAL LENGTH. THIS MOVEMENT COMES WITH A SPECIAL MOVEMENT ADAPTER, AND THE SHAFT EXTENDS ABOUT 3/4" PAST THE END OF THIS ADAPTER WHEN INSTALLED. IT IS ALSO POSSIBLE TO INSTALL THIS MOVEMENT USING THE WOOD OFFSET THAT IS ALREADY IN THE CLOCK, BUT PLEASE BE AWARE THAT THE WOOD OFFSET MAY NEED TO BE REMOVED TO INSTALL THIS MOVEMENT.
THE HANDS SHOWN IN THE PHOTOGRAPH ARE SERPENTINE STYLE AND HAVE A MINUTE HAND THAT IS 3" LONG FROM THE CENTER HOLE TO THE TIP. THIS STYLE HAND IS AVAILABLE IN THE FOLLOWING LENGTHS: 1 7/8", 2 3/8", 3", 4 1/4", AND 4 3/4". SPADE STYLE HANDS ARE SHOWN IN PHOTO #3 AND ARE AVAILABLE IN THE FOLLOWING LENGTHS: 2", 2 1/2", 3 1/2", 4 1/2", AND 5 1/2". HAND LENGTH IS DETERMINED BY MEASURING FROM THE CENTER HOLE OF THE MINUTE HAND OUT TO THE TIP. IF YOU ARE REPLACING AN EXISTING HERMLE CLOCK MOVEMENT, THE HANDS FROM YOUR OLD MOVEMENT WILL FIT THIS NEW MOVEMENT. ONE SET OF HANDS PER ORDER.
BRAND NEW Kieninger / Howard Miller dual chime wall quartz clock movement. This is a direct replacement for the Hermle 2214, 2215W and 2215 models which are no longer in production. Choice of Westminster or Ave Maria chimes. Plays ascending chiming melody on each 1/4 hour, then plays the full melody at the top of the hour, then strikes the hour after playing the full melody. Can also be set to play just the full Westminster melody plus the hour strike at the top of the hour, without playing the ascending melody on the 1/4 hours. Can be set to play 24 hours a day or set to shut off at night for 8 hours. Volume control. A very versatile quartz clock unit with great sounding chimes. Speaker is 2 9/16" (65 mm). Comes with mounting nut and washer, rubber spacer washer, minute hand nut, and installation instructions.
Uses 2 "C" cell batteries, not included. Alkaline type recommended.
1 YEAR FACTORY WARRANTY.
Thanks for looking!