TEST MODESet-up: Put the "Mode" switch in the Test position. Function: - The light turns on for only 5 seconds during daytime or night once it detects motion.
- This mode is used for checking whether the sensor is working properly.
- Test Mode can work during the daytime and night. Except for Range, the Lux and Time Setting doesn't work while using this mode.
| AUTO MODESet-up: Put the "Mode" switch in the Auto position. Function: - When the sensor detects motion, it lights up for 1-10 minutes according to the time it has been set.
- While using the auto mode, the toggle switches off and 2 seconds later on again. The light turns on continuously for ca. 8 hrs and goes off in the daytime.
- Auto Mode only works at night. When it's bright (> 100-150 LUX) around the sensor, the light goes automatically back to Auto Mode.
| MANUAL MODESet-up: - Move the pointer to the 1, 5 or 10 minutes, and then flip the light switch off for one second then back on to toggle between AUTO and MANUAL mode
Function: - Only works at night.
- The manual mode should be reset every night if you need constant lighting at night, it could be set to 6-8 hours temporarily
| ATTENTION PLEASE - Before installation, please read the user manual thoroughly and keep them for future reference
- Before installation, please ensure all of the accessories are included in the packaging. For any missing parts, please feel free to ask us for help
- Before installation, please first use the test mode to check whether the light can work properly
|