TRIUMPH & BSA

o/e part nos T394 57-0394 & BSA 42-3206

WARNING!! EU Buyers!!

High Import taxes may be charged!!

See my e-Bay Shop notice board for more details!

Clutch Roller Set 20 off

Correct Original "MADE IN ENGLAND" UK Imperial Size of:

1/4"  x 15/64"

***For Worlwide reduced shipping charge, please see below.

As fitted to TRIUMPH 1937 onwards, pre-units, Four & three Spring clutch

and all TWINS 350/500/650 & 750 capacity models through to

L.F. Harris Bonneville 1985

Will also suit LATER BSA A10 Models and all A65/A50 Models

Française! Spoken here!!!

These are the correct!!!

Size Rollers for the above detailed

Clutches.

N.B. THEY ARE NOT 1/4" x 1/4"

( These clutches will NOT work with 1/4" x 1/4" Rollers)

They are the correct Original UK Imperial size in inches of:

1/4" Inch x 15/64" Inch

bearing tolerance = .2495"/.2500"  x  .231"/.236"

The "Strange Size"  Metric tolerance equivalent is

 

6.337/6.35mm x 5.831/5.958mm (NOT 6mm)

Price is for ONE SET of 20 correct!! Size Rollers

To suit Early & Late Triumph & BSA Clutch Centres,

as detailed.

Also Suits all Pre 1963 models which did NOT use a

BRONZE thrust washer

Will also suit all Triumph & BSA Four spring,

+ Early & Late 3 spring

Clutches.

Including almost ALL Triumph Models 1937 through to

Harris Bonneville 1985

These roller bearings  were NOT fitted to Triples, T150/T160/ R3

They will NOT fit Triumph & BSA Smaller CC Single cylinder models.

(These models use a smaller diameter roller.)

See my other listings for two types of thrust washer + rollers sets.

SEE my TWO New! listings for 23 piece Clutch hub sets

To suit UNIT TRIUMPH 500cc Models & 650/750cc Twins.

These rollers are carefully checked, MEASURED!! and packed by a 

TRIUMPH engine and wheel specialist with 45+ years experience !!

(and still learning something new every day !!!)

Guaranteed  " Made in England "

A Guaranteed NON "Hassell"  Product

N.B.  I have listed these because a buyer requested them.

He had bought a set from a ??? "reputable" ??? seller to find they were

 the wrong size, both in diameter and in length !!!

His clutch would NOT work with these incorrect undersize bearings !!!

If you have a similar problem, PLEASE CHECK your clutch roller sizes

against the measurements given above.

Any questions please contact the seller via Ask the Seller a question.

SHIPPING INFORMATION - POST BREXIT!

Collect from my shop   CLOSED AT PRESENT

IMPORT Duty & Customs CHARGES are NOT Included

and may be payable to ALL EU & rest of theWORLD Destinations.

EU VAT is  collected when you buy on e-Bay

Guideline SHIPPING Rates

*** This item shipped "WORLDWIDE" for a maximum ADDED Shipping charge of £2.00 when combined with

any other order where you have already paid for shipping***

UK VAT TAX £1.91 Refund deduction on postage detailed below.

Insured 1st Class Postage to UK  £ 3.00

Insured, Tracked, signed for; Shipping to EU Europe & Scandinavia  £ 11.04*

Insured, Tracked, signed for; Shipping to the Rest of the World  £ 15.49*

* Includes UK TAX Refund of £ 1.91

Buyers, especially foreign, are invited to buy other items from my

 listings to combine & absorb shipping charges.

Export multi parts buyers: please add to your basket or ask for invoice, if this does not work,

please pay requested total, any overpayments will be instantly refunded

to your E-BAY account !

New inexpensive listings being added regularly. Keep watching !!

ROW£17.40          EU£12.95            THT£9.58           BSci                wg30             LLB rev180424

PLEASE NOTE: This seller is a Pensioner with accident injuries and other

 handicaps, busy clearing some of his 45+ years of shop stock .

 Estimated Delivery dates gives me time to send you your orders 

without incurring late delivery postings.

You should receive  your order well within estimated delivery dates.

If you have not received your order within

 the indicated delivery dates; PLEASE contact the seller

 urgently per messages for immediate & positive attention.

Shop Closures: Every four to five weeks my shop closes for 7/14 days. 

So don't look for to long, please BUY NOW if you require this item.

Whilst I am away listings will be temporarily suspended

and may no longer appear in your searches so please 

remember to save in your watched list if required.

JH Motorcycles   (Established 1974)

 Shop address and **Contact details per

 BUSINESS SELLER INFORMATION

 shown below.

JH Motorcycles UK VAT No: GB 227 9587 19

JH Motorcycles EORI No:  GB 227 9587 19000

**(Please click on "Complete Information" for Tel/E-Mail Details)

All items carry a money back guarantee

N.B.  VAT  invoice supplied to all UK Buyers

N.B.Certified, stamped, Export invoice, supplied to all EU & WORLD Buyers