SNES Style multiout port back panel mount for NESRGB. Connector board, 3D Printed back panel with 2 screws and cut guide to mount on back of nes.
NES NOT INCLUDED !
This 3D Printed back panel is printed using PLA filament and it is printed at normal speed to avoid any imperfections. I have other colors available, including RED, BLACK, SILVER and WHITE. This will avoid making many unnecessary holes on your console as you would need one for the 8 pin din, audio, and s-video. If you are going to install NESRGB on your front loader (Toaster Model) this will allow you to use NES Scart cables, NES S-Video cables as well as SNES Composite cables. I designed this panel and have installed it on the back of the front loaders for customers that get the NESRGB board installed. Please note that the SNES Style edge connector board was designed by db-electronics and were purchased by me from Osh Park. Also note, that this does not come with NESRGB board, pallet switch or any video amp, however I do have composite video amps that will work with this if you are interested I offer that at an additional $10.
If you do not feel comfortable installing this on your system, I also offer installation service that I add a video board and have audio out with a power led added to this as well. Please look at my other auctions if you are interested in that.
I include the following
1 Edge connector board with 3D Printed back panel ( See pictures )
2 screws to install the back panel
1 screw attached to the panel for the edge connector board
1 cutting guide.
If you have any questions I am also available by email and if need be by phone to walk you through the process if the pictures and step by step guide is not enough.
You will need the following tools (NOT INCLUDED).
A small file.
Small Phillips screwdriver
Small flat head screwdriver
Soldering Iron (preferably with a small tip)
Solder sucker / Solder wick
Tin Solder
Drill
an NES
and possibly an exacto knife
***Please note that the Nintendo modification should only be attempted by a person with adequate soldering skills and equipment. No warranty is expressed or implied.
I also offer many other services for retro consoles.
Examples:
Examples:
- LED Add on lights for all classic consoles.
- Repair Blinking NES consoles.
- RGB for PC ENGINE/Turbografx/N64/SNES mini/NES (with NESRGB board purchase)
- Region select for different types of systems.
- Sega Genesis S-Video add on and repairs
- and many many more
Also note that there are other services on ebay providing this type of add-on board. But keep in mind that I have over 80 video add on boards sold. When I started selling the video-add on boards those were no where to be found on ebay. So I saw the need and started making these for people to purchase. Buy with confidence just look at my feedback.
Please feel free to email me if you have any questions.
NES OR NESRGB BOARD NOT INCLUDED !
