Ideal Expert TIG 220 AC/DC

The IDEAL EXPERT TIG 220 AC/DC LCD is an inverter welder, manufactured from a new generation of IGBT transistors, which impresses with its small size and weight of just about 13kg. Small dimensions and weight guarantee high mobility and possibility to work even in hard to reach places. Despite its dimensions, the welder impresses with high power and maximum current of 220A! Such current allows to weld material up to 12mm thick.

The device has a clear and transparent LCD panel and the adjustment of parameters is made by means of multifunctional knobs and several buttons, which makes setting up the welder very easy and intuitive. Built-in memory allows you to save and read sets of settings, which definitely facilitate work, especially when you have repeatable cycles. A big facilitation when welding aluminum is the possibility to choose the right wave shape from the MENU.

The device gives the possibility of pulse current welding. Thanks to this function and full adjustment of pulse parameters, it is possible to focus the arc and change the shape of the weld as well as to weld thin elements. The arc is produced without contact with the built-in HF ionizer or in LIFT touch mode.

Main features:

Pulse - function to improve the quality of the weld, regardless of the position, two types of welding current are produced during welding: basic and pulsed,
TIG AC - rectangular wave alternating current welding is used to connect aluminium and its alloys,
HF IONIZATOR - contactless arc ignition using high frequencies. This technological solution makes it possible to eliminate tungsten contamination of the joint,
PUNKT - for making equal, point clamps, with adjustable welding time. Mainly used for overlapping or pre-jointing of structures,
TIG 2-LEVEL - the "2-level" current control enables switching between higher and lower current levels by pressing a button on the welding gun,
PRE GAS + POST GAS -  a helpful function to shield the welding pond. The lack of additional gas shielding may result in oxidation of the weld,
FAN STOP - adaptive fan, a solution that increases the life of the fan itself and additionally reduces the amount of dust in the device itself. The speed of the fan increases at the beginning of work and when it is heated up, and decreases when the welder is cooled down,

- Memory (up to 9 programs)
- Anti Stick, Hot Start, Arc Force, 2T/4T switch,
- Digital control,

The LCD display makes it easy to adjust the parameters of the welder:

Initial shielding gas outflow, initial current, current rise time, welding current, base current, duration of the current drop, final current, final shielding gas outflow, pulse width, pulse rate, AC balance, AC frequency, HOT START value, ARC FORCE value