Real-time 8/12 bit depth switch;
Ultra low noise and low power dissipation by using column-parallel A/D conversion;
Standard C-Mount camera;
Integrated zinc aluminum alloy housing;
With advanced video & image processing application RisingView
E3ISPM/ 20MP Microscope camera adopt SONY Exmor CMOS sensor as the image-picking device and USB3.0 is used as the data transfer interface.
Item No |
Sensor& Size(mm) |
Pixel(μm) |
G Sensitivity |
FPS/Resolution |
Binning |
Exposure |
Dark Signal |
||||||
E3ISPM20000KPA |
20MP/IMX183(C) |
2.4x2.4 |
462mv with 1/30s |
15@5440x3648 |
1x1 |
0.1ms~15s |
1 inch (13.06x8.76) |
0.21mv with 1/30s |
50@2736x1824 |
2x2 |
|||
60@1824x1216 |
3x3 |
OTHER HARDWARE CONFIGURATION |
|
Spectral Range |
380-650nm (with IR-filter) |
White balance |
ROI White Balance/ Manual Temp-Tint Adjustment |
Color Rendering Technique |
Ultra Fine Color Engine |
|
|
Recording System |
Still Picture and Movie |
Cooling System* |
Natural |
OPERATING ENVIRONMENT |
|
Operating Temperature |
-10C--50C |
Storage Temperature |
-20C--60C |
Operating Humidity |
30--80%RH |
Storage Humidity |
10--60%RH |
Power Supply |
DC 5V over PC USB Port |
SOFTWARE ENVIRONMENT |
|
Operating System |
Support Microsoft Windows XP / Vista / 7 /8 (32 & 64 bit) |
OS X (Mac OS X), Linux (Note: RisingView for MAC and Linux are Simple Version without Measurement and Image Process function) |
|
PC Requirements |
CPU: Equal to Intel Core2 2.8GHz or Higher |
Memory: 2GB or More |
|
USB port: USB2.0 High-speed Port |
|
Display: 17" or Larger |
|
CD-ROM |
Frame rate at Full resolution (5440x3648): 15fps
SONY Exmor COMS sensor
1) Low noise and High Sensitivity
1. As you can see from the above diagram, the “Exmor” sensor has 2 noise reduction process
including analogue noise reduction and digital noise reduction while the traditional one has
only analogue noise reduction.
2. Even the smallest amount of signal noise can have a negative impact on a photo. Noise is
introduced into an image if defects are present in the silicon from which the pixel is made.
By minimizing the occurrence of defects and contamination, and by shielding areas that are
vulnerable to defects, Sony has decreased the amount of noise that may be possible in other
sensors.
3. Sony enhanced sensitivity of the CMOS sensor by modifying the transistor array and layout,
and by making the photodiode as large as possible and creating a system that increases the
accuracy of light that is guided to the photodiode.
2) Back-illuminated, High Sensitivity and no CRA Related Defects ("Exmor R")
Sony further improved the capabilities of the CMOS sensor by developing a back-illuminated
structure, with the aim of creating a camera capable of taking exceptional photographs even by
candlelight. "Exmor R" is approximately twice as sensitive as a conventional front-illuminated
CMOS sensor and also features low noise. In a back-illuminated CMOS sensor, light is directed
onto the silicon substrate from behind, allowing light to be used with a level of efficiency not
possible with conventional front-illuminated pixel structures. Photographers can now create
smooth, high-quality images in low light settings, including night scenes.
The CRA related problem (background not uniform) does not exist anymore.
3) Fast Frame Speed
The key to increased speed can be found in parallel signal processing. CMOS sensors have
analog-digital (A/D) conversion circuits that convert analog pixel signals into digital signals. Speed
is increased by arranging thousands of these circuits in a horizontal array and allowing them to
operate simultaneously. The A/D conversion circuits used in Sony's CMOS sensors have important
characteristics, including the reduced size of the analog circuits in which noise is created, and
automatic noise cancellation. This circuit design enables noise reduction to be combined with
enhanced speed.
The latest Sony sensors can support fast frame speed and USB3.0 could help it to achieve their
best performance. This is the reason why RisingTech develop new cameras based on USB3.0.
Besides, USB3.0 help the camera to transfer video on 12/14bit.
4) Global Shutter (Some Sensors)
The conventional CMOS use the rolling shutter while CCD use global shutter. Now some Sony
“Exmor” and “Exmor R” sensors use global shutter which make the CMOS sensor more like a CCD,
such as IMX174, IMX302.
5) Good Continuity
In the near future, Sony will develop and provide better sensors and this will enrich RisingTech E3
and G3 family products.
USB3.0 5 Gbps interface ensuring high frame rate
Higher magnification (40X) view of a Canadian Penny photographed with the Rising Cam and Zeiss Stemi stereomicroscope
Cerebellum 40X brightfield microscopy
Cerebellum 100X brightfield microscopy
Cerebellum 630X brightfield microscopy
Vitamin C crystals in polarized light and full wave compensator 100X
Diatom Gomphonema sp DIC microscopy 400X
Plant section (Pyrus communis European pear) autofluorescence with Green excitation - 100X
Plant section (Pyrus communis European pear) autofluorescence with Blue excitation - 100X
The Below pictures is Image compare
between Nikon D800, D500 DSLR Camera and RisingCam imx183 1" 20mp Camera
This photo pollen of a hibiscus flower made by Buyer: Francisco Polonio Armada
The E3ISPM 20MP COMS camera body, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is
designed with a high quality IR-CUT to protect the camera sensor. No moving parts included. These measures ensure a
rugged, robust solution with an increased lifespan when compared to other industrial camera solutions.
Standard Camera Packing List |
|
||
A |
Carton L:50cm W:30cm H:30cm (20pcs, 12~17Kg/ carton, 0.045m3), not shown in the aboave Photo |
||
B |
Gift box L:15cm W:15cm H:10cm (0.8~1.0Kg/ box) |
||
C |
E3ISPM 20MP series USB3.0 C-Mount camera |
||
D |
High-speed USB3.0 A male to B male gold-plated connectors cable /2.0m |
||
E |
CD (Driver & utilities software, 12cm) |
||
Optional Accessory (Camera price not include optional accessory, if you want buy optional accessory, please contact RisingCam) |
|
||
F |
Adjustable lens adapter |
C-Mount to Dia.23.2mm Eyepiece Tube |
|
(Please choose 1 of them for your microscope) |
|
||
C-Mount to Dia.31.75mm Eyepiece Tube |
|
||
(Please choose 1 of them for your telescope) |
|
||
G |
Fixed lens adaptor |
C-Mount to Dia.23.2mm Eyepiece Tube |
|
(Please choose 1 of them for your microscope) |
|
||
C-Mount to Dia.31.75mm Eyepiece Tube |
|
||
(Please choose 1 of them for your telescope) |
|
||
Note: For F and G optional accessory, please specify your camera type(C-mount, microscope camera or telescope camera) RisingTech engineer will help you to determine the right microscope or telescope camera adapter for your application; |
|
||
H |
108015(Dia.23.2mm to 30.0mm Ring)/Adaptor rings for 30mm eyepiece tube |
||
I |
108016(Dia.23.2mm to 30.5mm Ring)/Adaptor rings for 30.5mm eyepiece tube |
||
J |
108017(Dia.23.2mm to 31.75mm Ring)/Adaptor rings for 31.75mm eyepiece tube |
||
H |
Calibration Lit |
106011/TS-M1(X=0.01mm/100Div.); |
|
106012/TS-M2(X,Y=0.01mm/100Div.); |
|
||
106013/TS-M7(X=0.01mm/100Div., 0.10mm/100Div.) |
|
Camera Standard Packing
Our Services
Warranty: 1 years
https://drive.google.com/file/d/1MBbHtjEn1krVzVH_Dy2QFEeFU3Okz82a/view?usp=sharing
Warranty period: 1 year
RisingTech always do our best provide excellent Service before/after sales for all buyers. RisingTech will provide our technical support if buyers have any questions of camera operation.
If camera has any quality problem within warranty period and must be returned to workshop repair it, RisingTech will repair camera or replacement new camera for buyer, RisingTech will stand freight.
If camera has quality problem out warranty period, RisingTech will repair camera for buyers too, buyer need stand freight.
If the camera is man-made damaged, no matter within or out warranty period, buyers should stand repair charges and freight.
|