Welcome to our page!

For sale we have our custom made 5 x 130 Wheel Spacers sold in pairs

With 10x shallow 17mm hex head, Tapered Seat 26mmRetaining bolts M14x1.5 bolts

Spacers are 25mm wide giving 50mm overall increase across the axle

THESE SPACERS ARE SUITABLE FOR ORIGINAL ALLOY WHEELS 

KIT COMES WITH 10 RETAINING BOLTS TO FIX TO THE HUB, THEN YOU USE YOUR ORIGINAL BOLT TO FASTEN WHEELS TO ADAPTERS (YOUR BOLTS MAY NEED MODIFYING TO SUIT THE SPACER) 

DONT WANT TO MODIFY YOUR OWN BOLTS? 

EBAY ITEM NUMBER 123730586234

These spacers are designed to fit a 71.5mm HUB and wheel bore. 

They will fit Audi Q7 2005 TO EARLY 2015 ONLY

THESE WILL NOT FIT THE NEW AUDI Q7 FROM 2015 ONWARDS

All of our custom made spacers and adapters are manufactured from 6082 billet Aluminium




One of the most cost-effective mods on the market and easy to fit in 7 steps

  • Simply unbolt your wheel and remove.
  • Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
  • Apply a little copper grease or similar to stop the faces sticking together.
  • Slide the spacer on to your existing hub.
  • Check the spacer is sitting flush against the original hub with no visible gap
  • Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
  • Secure the wheel with the extended bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD. Visit www.watfields.com

Please contact us to discuss any enquiries you may have