For sale we have 1 pair of  our custom made 4 x 100 Non Hubcentric Wheel Spacers/shims sold in pairs with 8 x M12 x 1.5 17mm hex head wheel bolts 

PLEASE NOTE, THESE NON HUBCENTRIC SHIM SPACERS WILL REDUCE THE HUB SPIGOT ON THE CAR BY 8MM, PLEASE DO NOT BUY THESE SHIMS IF THE SPIGOT IS NOT SUITABLE TO MOUNT THE WHEEL AFTER THESE ARE FITTED

Spacers are 8mm wide giving 16mm overall increase across the axle.

One of the most cost effective mods on the market and easy to fit. Simply unbolt your wheel, give the bore of the wheel and the face of the hub a good scrub with a wire brush to clean off any dirt, rust or debris, apply a little copper grease or similar to stop the faces sticking together and slide the spacer on to your existing hub. Check the spacer is sitting flush against the original hub with no visible gap, gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces, secure the wheel with the extended bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters. Please contact us to discuss any enquiries you may have.