Quantity |
4 Spacers for 4 Wheels |
Torque Specs |
140NM(103.5 Ft tb) |
Vehicle Bolt Pattern(PCD) |
5x150MM |
Hub Centric | Yes |
Wheel Bolt Pattern(PCD) |
5x150MM |
Material |
Forged Billet 6061-T6 Aluminum |
Spacer Thickness |
25MM / 1" inch |
Minimum Number of turns for Bolts/Nuts |
7.5 Turns |
Center Bore(H.B.) |
110 MM |
Fit Models |
Toyota 4x4 |
Thread Pitch |
14x1.5 / 14mm*1.5 |
Color Choice |
Black Anodized |
Bolts Grade |
12.9 Grade Tested |
Brand |
BLOXSPORT |
Bolt/Stud affects the safety performance directly, so they are very important accessories. The good product
is always along with the test report and can bear series of test.
The world is moving forward and we are improving
BLOXSPORRT had upgraded the studs/lug nuts:
(1). Studs/Lug nuts: surface treatment is from chroming to dacromet, becoming more anti-rust(10 Years);
(2). Studs: material is from SCM435 Alloy steel to SCM440 alloy steel, so the grade level is from 10.9
grade(vehicle
original level) to 12.9 grade(rally racing level).
Sample of wheel studs 12.9 grade has been tested by according to Test method: ISO898-1:2013, Cor.1:2013, on 08 December 2015, report No. GZIN1512051950ML. Report is available on request and can be validated by .
@ Black color hard anodized is more beautiful and luxuious, anti-rust.
Before you buy, please confirm that this is the thickness you need. If you not sure which thickness you can
install for your car, please use the measuring device to measure from the inside of the straight edge to the
inner fender lip as below showing.
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).