- Wheel Spacers
- For ACURA
- For AUDI
- For BMW
- For CHEVROLET
- For DODGE
- For FORD
- For HYUNDAI
- For INFINITI
- For JEEP
- For LAND ROVER
- For LEXUS
- For MAZDA
- For MERCEDES-BENZ
- For MINI
- For MITSUBISHI
- For NISSAN
- For PORSCHE
- For SAAB
- For SCION
- For SUBARU
- For SUZUKI
- For TESLA
- For TOYOTA
- For VOLKSWAGEN
- For VOLVO
- Wheel Adapters
- Wheel Hanger
- Hub Centric Rings
- Titanium Wheel Lug Bolts
- Aluminum Wheel Lug Bolts
- Aluminum Wheel Lug Nuts
- Other
Quantity |
2Pc 15mm + 2Pc 20mm |
Torque Specs |
113NM(83.3 Ft tb) |
Vehicle Bolt Pattern |
5x114.3MM / 5x4.5" |
Hub Centric | Yes |
Wheel Bolt Pattern |
5x114.3MM / 5x4.5" |
Material |
Forged 6061-T6 Aluminum |
Spacer Thickness |
Front 15mm Rear 20mm |
Minimum turns for Lugs |
6.5 Turns |
Hub Center Bore |
60.1 MM |
Fit Models |
Toyota / Lexus |
Thread Pitch |
M12x1.5 / 12mm*1.5 |
Color Choice |
Anodized Black |
Stud Grade |
12.9 Tested |
Brand |
BLOXSPORT |
- High-Strength Aircraft Aluminum Alloy 6061-T6, Forged Material.
- Brand Wheel Spacers, Real Material, Laser Material Number and Logo on Spacers/Adapters.
- Hard Anodized for durability and corrosion protection.
- Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance.
- Limited Life Range Tested for Wheel Bolts/Stud (1 Million Times) in accordance to ISO3800.
- Strength-Tested for Applications (Bolt/Stud/Nut) in accordance to ISO898-1,ISO898-6,SAE J429,SAE J995.
- Anti-Rust Tested (NSS 72 Hours) for Applications (Bolt/Stud/Nut) in accordance to ISO9227.
This Wheel Spacer Part is compatible with these vehicle(s):
2021-2019 - Toyota - Alphard / Hybrid Vellfire
1995-2019 - Toyota - Avalon
1996-2019 - Toyota - RAV4
1992-2019 - Toyota - Camry
1984-2019 - Toyota - Crown
2001-2019 - Toyota - Highlander
1991-1995 - Toyota - MR2
2004-2019 - Toyota - Reiz Mark X
1999-2014 - Toyota - Solara
1986-1998 - Toyota - Supra
1997-2004 - Toyota - Tacoma (2WD ONLY. Excludes Pre Runner)
2005-2008 - Toyota - Tacoma (only 5-lug vehicles)
2006-2008 - Toyota - Highlander Hybrid
1993-2019 - Lexus - GS / F GS240 GS250 GS300 GS50 GS400 GS430 GS450 F Sport
1989-2019 - Lexus - ES ES200 ES240 E250 ES300 ES330 ES350
2009-2019 - Lexus - HS HS250 HS250h
1998-2019 - Lexus - IS / F IS-F IS250 IS200 IS300 IS350 F Sport IS250 AWD IS200t
1990-2006 - Lexus - LS LS400 LS430
2014-2019 - Lexus - NX NX Turbo NX300h NX200t
2014-2019 - Lexus - RC / F RC-F RC300 RC350 RC Turbo RC200t RC300h
1998-2019 - Lexus - RX RX20t RX270 RX300 RX330 RX350 RX400h RX450
1991-2010 - Lexus - SC SC300 SC400 SC430
2019-2019 - Lexus - UX UX200 UX250h
- 8 Main Advantages
- Hub Centric Design-- NO VIBRATION
(1). Hubcentric Wheel Spacer: The locating ring fits into the space on the wheel exactly as the hub's locating ring would. This means that the weight of the car is still resting on the hub rather than the wheel studs, meaning the vehicle is set up just like it came from the factory, meaning no vibrations from the wheels, and also protect the studs.
(2). Non-hubcentric Wheel Spacer: The weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car.
(3). BLOXSPORT team design different hub centric(Wheel-centric lip) for different car models. Making the car at high speed, speed cross-country more secure and stable. To ensure car no vibration or shaking.
-
SAFETY--Forged Aluminum Alloy Material
(1). As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety.
(2). But BLOXSPORT insist on using the FORGED material, insist on the conception of putting safety in the first place and reject to use the casting material. We made laser material number(Forged Aluminum Alloy 6061-T6 or 7075-T6) and brand logo on spacers. Refuse "Three-None".
- Bolts/Studs/Lug Nuts
Bolt/Stud affects the safety performance directly, so they are very important accessories. The good product
is always along with the test report and can bear series of test.
The world is moving forward and we are improving
BLOXSPORRT had upgraded the studs/lug nuts:
(1). Studs/Lug nuts: surface treatment is from chroming to dacromet, becoming more anti-rust(10 Years);
(2). Studs: material is from SCM435 Alloy steel to SCM440 alloy steel, so the grade level is from 10.9
grade(vehicle
original level) to 12.9 grade(rally racing level).
- Tested Reports
Sample of wheel studs 12.9 grade has been tested according to Test method: ISO898-1:2013, Cor.1:2013, on 08 December 2015, report No. GZIN1512051950ML. Report is available on request and can be validated.
- Machining Precision -- CNC Machined
Professional Data Measurement: The consummate data comes from constant practice, BLOXSPORT
always make perfection more perfect.
CNC Machined: The wheel spacers were modern CNC machined, Accurate to 0.02mm Machining precision. The surface was more smooth, increasing car driving more stable and more secure and no vibration.
- Black Hard Anodized Finish
@ Black color hard anodized is more beautiful and luxuious, anti-rust.
- How Thick Should your car fit?
Before you buy, please confirm that this is the thickness you need. If you not sure which thickness you can
install for your car, please use the measuring device to measure from the inside of the straight edge to the
inner fender lip as below showing.
- Item Benefits:
- Remove gad by spacing wheel and tire out to fit with fender after handing
- Increased performance in wheel drive conditions, improved appearance.
- Improve brake caliper clearance, BLOXSPORT spacer adds more clearan between brake caliper and wheel.
- Add inner fender clearance, add clearance between tire/wheel and inner fender.
- Add clearance between suspension and tire/wheel.
- Product effect:
- Increase the car wheel track, reduce the body center of gravity, reducing the body deformation.
- To improve vehicle stability and improve handing and other functions.
- To ensure that the car is more flexible, smooth and safe.
- To be able to make the sability of the vehicle greatly ascend.
- Installation Remind
- Installation should only be performed by a trained professional.
- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
- Please take the necessary measurements to ensure proper fitment. we only guarentee that you will receive the spacers that is described, we do not guarentee any fitment onto any vehicle.
- Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation.
- If the studs are longer than the Adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your exsisting lugs if you choose not to purchase shorter studs.
- If you have any questions reguarding how to properly measure your bolt pattern, please contact us via ebay, and we can give you detailed instructions.
- Factory Shows
We are the manufacturer, welcome to contact us for OEM customized service
- Safety guidelines(Minimum number of turns for wheel bolts/nuts)
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12 mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
- How much standard torque force of different lug bolts or nuts is?
--All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday.
--All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs.
--Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive.
--We will provide you with tracking numbers when the item is shipped out.
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).
