Installation:
If your monitor is using a inverter, then this kit replace the inverter to plug into the driver board; If your monitor is a high-voltage integrated power supply board, then the board energized, find 12V (capacitance), and then unplug the power supply,use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF. In simple terms, the original high voltage power supply is disconnected,instead of the inverter,in the original high-pressure front to take power.
The LED Backlight Advantage:
- High Brightness LED backlight.
- Improved Dynamic Contrast Ratio.
- Improved Color Gamut for more Lifelike Images.
- Longer lifespan, typically lasting over 100,000 hours
- High shock/Vibration resistant.
- Low Heat Generation.
- Environmental Benefits.
- Not as fragile as LCD CCFL lamps .
- LED can be cut to fit the right size.
- Being solid state devices, the LED will perform exactly as when they were manufactured as opposed to the CCFL which loses light output continuously over their life up to 50%.
- By upgrading to this high brightness LED backlight. Now,you can experience lifelike images.
How to replace:
- Replace the CCFL backlight lamps+ inverter by this kit, LED board+ LED strips.
- If your LCD inverter can not be removed which come with powerboard, you should find those pins(VIN, ON/OFF, ADJ, GND) from your board to driver the LED board.
- No instructions for kit, so, you should know how to find pins and how to install.
LED strip:
- Size L/W/H: 540mm*4mm*3mm
- Lamps specification: 3528
- Can be cut by every 3 lamps as a group.(we have marked on the strips by line)
LED board:
- Size L/W: 7cm*2cm
- Dimable, connect to the ADJ pin to adjust light.
- Input: 9-30V
- Output: 9.6V
- VIN : Voltage
- ENA: On/Off
- DIM: ADJ adjust brightness
- GND: Connecting Ground
|
- Package including: LED board*1pc, LED strips*2pcs,Cable*1pc (no user manual)
- Pack in bubbles first, Then put into hard PVC tube.
Other Size LED Strip, please click here. For 15inch Length 310mm https://www.ebay.com/itm/123403960509 For 17inch Length 355mm https://www.ebay.com/itm/123821783310 For 19inch Length 395mm https://www.ebay.com/itm/123821786719 For 19inch wide Length 420mm https://www.ebay.com/itm/123821791593
For 22inch Length 488mm https://www.ebay.com/itm/123821794060 For 24inch Length 540mm https://www.ebay.com/itm/123634891276 For 26inch Length 580mm https://www.ebay.com/itm/123821794959 For 27inch Length 620mm https://www.ebay.com/itm/123821795505 |
Attention: - Do not provide technical support .You should know how to use it. If not, Think twice about your order. Thanks!
- We have many different sizes. if you can't find, please feel free to contact me.
- The more quantity, the lower price. Please contact us for details.
- We accept PayPal as the payment method only, you can use credit card through PayPal.
About Shiping: - We shall ship your items 1-2 days after your payment is cleared.
- International Standard Flat Rate Shipping.
- In general, it will takes 10-15 working days from China to USA,UK,Canada,Australia.15-25 working days for other countries.
- If you don't receive your items OVER 30 days,please contact us.
About Refund:
- If you are not satisfied with our products,we will resend or refund your full money.
|