Feature:

1. Using the latest composite fiber electric heating wire, waterproof and flame retardant, more uniform and stable heating, more comfortable feel

2. Built-in intelligent temperature control chip, three-stage adjustable temperature, intelligent temperature control is more secure

3.Large heating area

4. Convenient and quick.

Specification:

Product name: Luxury intelligent three-speed thermostat electric handle

Product material: Nitrile material

Length of handle: Left handle: 143 * 36MM; Right handle: 127 * 36mm

Packing size: 20x13x6cm

Product color: black

Suitable pipe diameter: 22mm

Input voltage: DC12V

Product power: Red light 35W, blue light 25W, green light 17W

Handle temperature: Low temperature 40 ° C, medium temperature 50 ° C, high temperature 60 ° C

Handle Type: Sealable and Passable Electric Handlebar

Switch type: Multi-level adjustable temperature control switch

Applicable models: 12V motorcycle with a handle diameter of 22mm

Product accessories: 3M rubber x1, rearview mirror fixing bracket x1

Operation instructions:

[1] Power on: Red light, blue light, green light flashes once after each turn off

[2] Standby: Red light breathing flashing state, the temperature will automatically turn into blue light mid-range automatically after the temperature reaches the highest level, and it will automatically shut down after 2 hours

[3] Working status: indicator light is always on (high-grade: red light is always on, mid-range: blue light is always on, low-grade, green light is always on)

 [4] Press and hold the key for 3 seconds: enter standby mode or shut down

 [5] Click the key: switch gear

How to use the switch: Press and hold for 3 seconds to turn on, the red breathing light will turn on, and it will automatically turn blue when a certain temperature is reached. Press once to change the temperature of the blue light to medium temperature, double tap to turn green, and the temperature is Lowest, press three times for the red third gear high temperature, press and hold for 3 seconds to turn off, and automatically turn off after 2 hours of standby, no longer need to worry about the virtual power consumption

Installation instructions:

[1] Remove the original handlebar

[2] Wet the inner hole of the left hand with soapy water, and the twisting amplitude should not be too large during installation.

[3] When the balance bar is installed on the left handle, adjust the position of the balance bar to be slightly separated from the handle. Do not squeeze the handle when tightening the screws

[4] Power line, the red line is connected to the positive electrode, the black line is connected to the negative electrode, please confirm before connecting, do not connect the reverse

[5] The left-hand handlebar should have enough power to leave the cord when installing.

[6] Put the switch L-shaped bracket on the rearview mirror, fix it to the base of the rearview mirror, and tighten it.

Package Content:

1 Set of heated handles

Note:

[1] When installing the left handle, do not twist the handle too much. Excessive twist will cause the heating wire to shift.

[2] For models with balance iron, please adjust the balance iron installation position, do not squeeze the handle when tightening the screws, the balance iron is slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a spacer between the balance iron and the handlebar. Excessive squeezing the handlebar will cause difficulty in turning the handlebar switch, and the heating wire will squeeze out the handlebar surface and cause abnormal damage