Technical Specification
Product | Universal Screw Anchor |
Head Type | Pan Head |
Diameter | 6.5mm |
Length - Measure from under the head | 32mm |
Min Embedment Depth | 20mm |
Hole / Drill Diameter Size | 5mm |
Drive Type | Phillips |
Driver Bit Size | PH2 |
Head Diameter APPROX | 7.90 - 8.05mm |
Material | Carbon Steel |
Finish | Zinc Plated |
Brand | Hobson |
Pack Quantity | Choose from the dropdown above |
Product Information
- 6.5mm x 32mm Pan Phillips (PH2) Wall Katt Universal Screw Anchor Zinc Plated are an universal fixing designed for use in all types of base material including concrete, stone, brick, plasterboard and timber. No pre-drilling or plug required in most materials.
- Features / Benefits: Light duty fixing application such as signs, shelf brackets and lighting and electrical fixtures. No pre-drilling required when screwing into wallboard or wood (check data sheet for additional information). When removed they leave a much smaller hole than toggles or other systems. Thread design prevents spinning and stripping
- Material / Coating: The screw is Zinc Plated, the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Buy with confidence: ⇒ 8+ years experience selling online, > 15,000 stock lines, > 40 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
- Need help? message us through eBay
BOLTS - METRIC
BOLTS - IMPERIAL
SOCKET SCREWS - METRIC
SOCKET SCREWS - IMPERIAL
MACHINE SCREWS - METRIC
MACHINE SCREWS - IMPERIAL
NUTS - METRIC
NUTS - IMPERIAL
WASHERS - METRIC
WASHERS - IMPERIAL
HARDWARE
TOOLS
NUTSERTS - FLANGE
NUTSERTS - COUNTERSUNK
NUTSERTS - RUBBER / WELL NUTS
FASTENER KITS
METAL SCREWS - BUTTON
METAL SCREWS - COUNTERSUNK
METAL SCREWS - DECKING
METAL SCREWS - FLAT
METAL SCREWS - HEX
METAL SCREWS - WAFER
TIMBER SCREWS - BUGLE BATTEN
TIMBER SCREWS - BUTTON
TIMBER SCREWS - CHIPBOARD
TIMBER SCREWS - COUNTERSUNK
TIMBER SCREWS - DECKING
TIMBER SCREWS - HEX
TIMBER SCREWS - PARTICLEBOARD
TIMBER SCREWS - PLASTERBOARD
TIMBER SCREWS - WAFER
SELF TAPPERS - BUTTON SECURITY
SELF TAPPERS - CSK PHILLIPS
SELF TAPPERS - CSK SECURITY
SELF TAPPERS - MUSHROOM PHILLIPS
SELF TAPPERS - PAN PHILLIPS
MASONRY - DROP IN ANCHORS
MASONRY - HOLLOW WALL ANCHORS
MASONRY - NAIL IN / PIN ANCHORS
MASONRY - SCREWS BOLTS
MASONRY - SLEEVE ANCHORS
MASONRY - SPRING TOGGLES
MASONRY - WALL MATES
MASONRY - WALL PLUGS
MASONRY - WEDGE ANCHORS
POP RIVETS - DOME
POP RIVETS - COUNTERSUNK
POP RIVETS - LARGE FLANGE
ALL THREAD
PINS & CLIPS
DRILLING
DRIVER BITS