Specialized Stumpjumper (2019 2020 model specific - can be used on any year model with internal cable routing) rock strike guard 6mm thick high density foam rubber shock protection. The main picture of the Levo is for illustration, picture 2 and 3 show the pad you  are buying. 

This rubber is the same high impact shock dissipating cushioning used on the soles of high end training shoes. Other properties,good cushioning, shock resistance, heat insulation, moisture resistance and chemical corrosion resistance, and is non-toxic and non absorbent. 

Protect the down tube from rock strike ,stone chips and impacts.

This easy to apply protection will save dents and damage thereby retaining the resale value.

400mm long, 70wide at base, 50mm wide long section. 

It comes with industrial strength 3M peel and stick adhesive -especially formulated for wet conditions.

This set can be applied in 5 minutes.

Just thoroughly clean your battery and degrease the area the cleaning pad provided or  with fire lighter fuel, industrial alcohol or other evaporation agent .

This protection kit is bike specific but may work on other models.

A truly useful accessory for damaged prevention and it will keep the frame in pristine condition helping future resale.

NOTE: Make  sure of the alignment when positioning as the adhesive is very grippy.

NOTE 2: When applying the adhesive make sure it is applied in a temperature of no lower than 16C. If you bring a bike indoors from a cold shed or garage keep it in the warm area to allow the surface temperature to warm up, otherwise there may be condensation on the surface which will reduce adhesion.

NOTE 3. Apply firm pressure to the pad, especially on the edges of the curved surfaces. The £m adhesive is designed to hold in wet conditions but it must be carefully applied in the first place

Made and dispatched 1st class from the UK FREE

Condition is New. Dispatched with Royal mail free 1st class