Offered for B-I-N consideration is one (1) Snap on tune up kit for the FAR72C only (SEE BELOW SPECIAL NOTE), 3/8" drive air ratchet. Shown above are the new parts as: a 4-vane set with springs, a throttle valve and seat kit and o'rings for the inlet bushing and barrel. The Snap on print above is provided with every kit purchase. I typically do not provide bearings on air ratchet tune up kits. 

The Snap on FAR72C200 trigger button is added to this kit as a separate kit from my other FAR72C kit offered on ebay that kit DOES NOT have a new trigger button provided with it.

VALVE SEAT INSTALLATION INFORMATION:

The white new OEM replacement valve seat provided in this kit has 4 dots and a 360 degree raised circle that is the sealing surface for this part. The circle faces up to you as you install this part. Take care not to cut or ding it by using a 12-point thin wall socket with vaseline or clean grease. Place the seat into the broach of the socket with grease to hold it. Use a 1/4" drive extension plugged into the socket for safe and easy seat installation. A gentle tap with a small hammer will locate this part into the bore of the handle. The red tip valve stem fits into your trigger stem hole. Then the new spring and bushing can be installed with the new o'ring I provide in this kit. If your tool runs on or leaks air with your air connected and the trigger released this seat and red tip valve will make the repair. If you have questions feel free to ask me for help.

*SPECIAL NOTE:  DO NOT BUY THIS KIT TO TRY TO MAKE YOUR REPAIRS TO ANY FAR72, FAR72A OR FAR72B AIR RATCHETS. THE FAR72C200 TRIGGER BUTTON MAKES THIS KIT ONLY FOR THE FAR72C MODEL.

 

The shipping weight is 4 ounces with an eBay USPS.com Ground Advantage shipping label. Ground Advantage is the slowest and cheapest shipping service offered on eBay. International orders are shipped to Glendale Heights, Illinois where the eBay Global Shipping Program completes the delivery process.