M.2 NVMe SSD NGFF to PCIE 3.0X4 X8 X16 PCI Express Adapter Expansion Card

Product Description                                            

100% Brand new and high quality

1.M key NVME M.2 NGFF SSD to PCIe X4 X8 X16 adapter.

2.The speed and other properties is not changed, only form conversion interface.

3.Support Type 2230/2242/2260/2280 type M.2 SSD dimension.

NOTE:

Only supports the NGFF M.2 SSD of the M-KEY nvme protocol, does not support the B-key NGFF M.2 SSD of the SATA protocol.

This adapter card is equipped with 3 high-quality tantalum capacitors. If your chassis power supply is relatively small, it is recommended to buy this adapter card!

This product can be inserted into the motherboard PCIe x16 and x8 and x4 interfaces, but the operating speed is PCIe x4!

1. Confirm the interface protocol of your hard drive. This riser card only supports PCIe x4 x2 NVMe protocol M.2 NGFF SSD solid state drives with sizes of 2280 2260 2242 2230.

2. Confirm whether your motherboard supports this riser card (there is such a slot, which supports NVMe protocol), this riser card is inserted in the PCI-E x16 or PCI-E x8 or PCI-E x4 slot of your motherboard, and confirm your motherboard BIOS For hard disks that support NVMe protocol, if your motherboard chipset is lower than the 9 series, This card cannot be used. Otherwise, you can only install win10 system, and the hard disk should store data from the disk.

3. Be sure to confirm the interface of your motherboard, and don't insert it in the wrong position, it may burn the motherboard and the adapter card.

Reasons not recognized after installation:

1. If your motherboard chipset is below 9 series, it is not recommended to use NVMe protocol PCIe x4 and NVMe protocol PCIe x2 M.2 NGFF solid state drive! It's not that your motherboard can use the M.2 NGFF solid state drive of NVMe protocol as the system startup disk if your motherboard has a PCIE interface. The key depends on whether your motherboard BIOS can support it! Under normal circumstances, the chipsets below the 9 series certainly cannot support NVMe protocol solid-state drive startup!

2. If the hard disk is not partitioned or the hard disk uses other disk formats in the previous computer, the partitions will not be visible when you open "My Computer", please enter the disk manager to partition and format the hard disk!

3. You must use the original win 10 installation disk to install the system. Win7 system and PE system do not support NVE protocol solid state drives because they do not have NVMe drivers. In such an environment, you cannot see NVMe protocol solid state drives .

4. If your hard disk has a bios disk password set in the previous machine, be sure to clear it, otherwise this hard disk can only be used in your original machine, and it will not be recognized once the device is changed!

Package includes                                             

1* M.2 NVMe SSD to PCIE 3.0 X4 X8 X16 Expansion Card