Metal Gates- 3 Different sizes

These are 3 odd sized metal gates. 

Gate number 1 was originally slide mounted so has the runners on the end. It measures 224 x137 cm and is made with a box section frame and galvanised sheet covering.  The box section and covering are corroded on one end so that probably needs to be replaced if you want a perfect gate, or you could cut it down to make a smaller one if you wish.

Gate number 2 has side hanging points.  It measures 221 x 126 cm for the actual door, with an extra few cm for the hinges.  It is half painted black (the bit that wasn't overlapping another door) but is also galvanised sheet. It is in good condition and very solidly made. It could be cut down to the same size as gate 3 if you can re-attach the hinge.

Gate number 3 also has side hanging points.  It measures 152 x 126 cm for the actual door. It is essentially the bottom 2 sections of an equivalent door to number 2, so could be cut down to that size in a few minutes with an angle grinder.  You would just need to cut the upper hinge off and re-weld it further down.

Prices based on what the metal is worth to me to re-use on other projects.  I have listed as 3 available so let me know which one you want and will update the listing as and when they go.

Collection only due to the weight, from the A37 south of Shepton, with cash on collection preferred.  I can help to load of you are putting them on a roof rack or similar.