Model Godox X2T-O Transmitter
Built-in Bluetooth for APP Control:
You Can Connect the X2T-O to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera|

TTL Autoflash and Pro Functions:
Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups' Output Value Simultaneously, ect.

New User Interface, Easy to Operate:
LCD with Clear Display Effect, With 5 Group Setting Buttons, and 3 Function Buttons to Realize Quick Setting. Relocated Control-Wheel. New Hotshoe Locking Mechanism. New AF Assist Light that Uses Visible Light Instead of A Red/Infrared Pattern. USB-C Connection that is More up to Date and More Reliable than A MicroUSB

Effectively Avoid Signal Interference:
With 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same

3.5mm Sync & USB Type-C Port:
It can work as a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Olympus Panasonic Speedlights Trigger/ Flash Trigger with 3.5mm Sync Cord Jack

Compatibility for Smarphones, Cameras and Flashes
1. Compatible Smartphone Models (This Table Only Lists the Tested Smartphone Models, NOT All Smartphones. For the compatibility of other Smartphone models, a self-test is recommended.)
iPhone 6S, iPhone 6S Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus iPhone 8, iPhone 6 Plus, iPhone 6, iPhone X; Samsung galaxy S8, Samsung galaxy Note8, Samsung galaxy S9
HUAWEI P9, HUAWEI P10, HUAWEI P10 Plus, HUAWEI Mate 9 Pro, HUAWEI Mate 9, HUAWEI Mate 10 Pro, HUAWEI Mate 10, HUAWEI P20, HUAWEI P20 Pro

2. Compatible Camera Models (This table only lists the tested camera models, not all Olympus & Panasonic series cameras.)
Olympus: PEN-F, E-P3. E-P5, E-PL5, E-PL6, E-PL7, E-PL8, E-M1, E-M10II
Panasonic: DMC-G85, DMC-GH4, DMC-GF1, DMC-GX85, DMC-LX100, DMC-FX2500GK, DMC-GH5

3. Compatible Flash Models (Please Note: Supported Functions should be both owned by X2T-O and flashes.)
No Extra Receiver Needed: AD600 series/AD400 series/AD360II series AD200 series/V860II series/V850II, V350C/TT685 series/TT600/TT350C QuickerII series/QTII/SK II series, DP II series/GSII
XTR-16 as Receiver(NOT Included): AD360/AR400(The flashes with Godox wireless USB port), Quicker series/SK series/DP series/GT/GS series/Smart flash series(Can only be triggered)
XTR-16S as Receiver(NOT Included): V860C V850

Specifications
Flash Exposure Control
TTL autoflash: TTL
Manual flash: Yes
Stroboscopic flash: Yes
Wireless Flash
Transmission range (approx.): Up to 328ft / 100m
Built-in wireless: Godox X 2.4GHz
Modulation mode: MSK
Channels: 32
Wireless ID: 01-99
HSS (High-speed sync): Yes
Second-curtain sync: Yes
Flash exposure compensation: Yes, ±3 stops in 1/3 stop increments
Flash exposure lock & Focus assist: Yes
Modeling lamp: Control the modeling lamp globally or individually
Audio Beep: Yes
Wireless Shutter: Acts as receiver to control the camera trigger through the 2.5mm sync cord jack
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings are stored 2 seconds after the last operation & recovered after a restart
Physical Properties
Display: A large LCD panel, backlighting on or OFF

Package Contains:
1 x Godox X2T-O TTL Wireless Flash Trigger
1 x User Manual (English & Chinese)