Welcome to our page!

For sale we have our custom made 5 x 112 MERCEDES NON HUBCENTRIC Wheel Spacers sold in pairs

MADE FOR MERCEDES FRONT HUBS WITH AN EXTRA LONG 20MM+ SPIGOT 

150mm outside diameter 

NO BOLTS ARE SUPPLIED WITH THE 2 SPACERS

Spacers are 8mm wide giving 16mm overall increase across the axle.

These spacers are designed to fit a 66.6mm HUB and wheel bore.

All our custom-made spacers and adapters are manufactured from 6082 T6 Solid billet Aluminium and machined by our skilled Engineers at our Barnsley HQ.

One of the most cost-effective mods on the market and easy to fit in 7 steps

• Simply unbolt your wheel and remove.
• Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
• Apply a little copper grease or similar to stop the faces sticking together.
• Slide the spacer on to your existing hub.
• Check the spacer is sitting flush against the original hub with no visible gap
• Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
• Secure the wheel with the extended bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD.

Visit www.watfields.com

Please contact us to discuss any enquiries you may have