Welcome to our page!

For sale we have our custom made 5 x 112 to 5 x 120 Wheel Adapters sold in a set of 4 with 

20 x M14x1.5x 26mm (Shallow 17mm Hex head bolt) bolts for fixing to the Hub. 

The adapter threads have stainless steel inserts for thread protection and a more secure fixing than standard threaded aluminium adapters.

Please note this listing does not come with shorter T5/T6 bolts

THIS KIT WILL REQUIRE YOU TO MODIFY YOUR EXISTING T4 WHEEL BOLTS TO FIT THE ADAPTERS

see listing 124677372687 for the kit with the shorter wheel bolts

Outside diameter (150mm) adapters ALLOY WHEELS ONLY

Got Steel Wheels? see item -124380417623


Quick specs

• Hub PCD - 5x112

• Hub bore - 57.1mm

• Hub bolt thread - M14x1.5


• Wheel bore - 65.1

• Wheel PCD - 5x120

• Wheel Bolt thread - M14x1.5 (stainless steel insert)

• Fixing bolts - 20 x M14x1.5x 26mm (Shallow 17mm Hex head bolt)

• Thickness - 20mm

• Quantity - 4

• 6082 aluminium material


Adapters are 20mm wide giving 40mm overall increase across each of the axles.

All of our custom made spacers and adapters are manufactured from 6082 billet Aluminium.

These Adapters are designed to fit a 57.1mm 5x112 HUB (VW T4 fitment) and a 65.1mm 5x120 wheel bore (Transporter T5/T6 Wheels)

One of the most cost-effective mods on the market and easy to fit in 7 steps

  • Simply unbolt your wheel and remove.
  • Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
  • Apply a little copper grease or similar to stop the faces sticking together.
  • Slide the adapter on to your existing hub and tighten up with the bolts provided.
  • Check the adapter is sitting flush against the original hub with no visible gap
IF YOU HAVE NOT PURCHASED THE SHORTER WHEEL BOLTS YOU WILL NEED TO MODIFY YOUR T4 ONES TO SUIT OUR ADAPTERS
  • Gently position the wheel on to the adapter spigot taking care not to damage the machined surfaces.
  • Secure the wheel with the wheel bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD.

Visit www.watfields.com

Please contact us to discuss any enquiries you may have