Hello,
IMPORTANT SHIPPING COST NOTE:
Due to recently increased shipping cost of
International packages I have organized many of my listed items in “related item groups” …this
practically means that you can greatly benefit from combined shipping
if
you wisely devote some time and search through my eBay listings and
find two or more items that might interest you.
Then just send me a message with your item choices
and I will respond the same day with calculated combined package weight to result
a new greatly reduced shipping cost…in
many cases your second or third item can be included in the same box as the
first one with almost zero or very low additional shipping cost!
***************
Note: I supply this film in a 6 meter roll package, roll
width is 65cm (653mm measured) however if you need more I can cut up from the
roll to any total size you require in half meter increments… just send a message with the length you require and I will get back with
a price offer, hope this helps your needs as you can better nest your parts for
a minimum material waste.
Be sure to send me a message before placing your order with your required meters and I will respond with an offer on shipping cost.
This is a high quality model airplane
covering film produced by famous German firm Graupner… but before I start to present its features please
let me share some personal history:
I have been covering model airplane
structures for about 40+ years using a variety of heat shrink covering films,
some of them were just fair, some gave average results and a few had features
that gave the opportunity to produce the high class/show type finish I require…
have to confess that almost all films tried where creditable/good products as
they provided the builder with a good basic covering film to finish their
models.
Have always had a great respect for
Graupner products so when the opportunity came to buy a complete new bulk roll
of Superfilm from a friendly local hobby shop owner that was just clearing his
stock I took the chance for several good reasons:
- Liked the color… a unique light blue that
combines color vividness without being overly bright… very pleasing to the eye.
- Product label described some novel
features that looked quite promising.
- Material used is thermo plastic which
based on my experience is the best choice to conform around compound three
dimensional curves.
After actual use on balsa sheet or open
structures as well as direct foam application I was pleased with results:
-Found to be one of the easiest coverings
to apply… good beginner covering film.
- Foam covering either XPS or EPS is almost
as easy as balsa… a base primer/layer of heat activated adhesive will
definitely help adhesion but this applies to all film coverings used on bare
foam.
- Despite being plastic based it has very
good puncture resistance and able to stiffen an open frame/built up wing… but
not as much as a polyester base covering.
- Compound curves such as wing tips are
easy to cover as it has good strechability when locally heated, a few micro wrinkles
produced by mistakes are almost diminished by further heat application… but
only up to a critical high temperature threshold point…this critical temperature
point applies to all film coverings… with Superfilm this point is quite wide
and a progressively darkening color change gives early warning to stop pushing
the material.
- Wide temperature range is most welcome especially
when combined with an additional base adhesive layer…this wide range is an
important factor and Supercote adhesive layer is extremely heat sensitive so
able to stick from quite low heat to almost top limit… at this top temp limit
some coverings just highly melt their adhesive layer but without being able to
sufficiently stick.
- Ability to stick at how heat renders it
as an excellent foam covering film as well as eliminating future bubble
formation… apart from the underlying structure or actual film moisture
content high heat initial application is the major factor to
induce future surface bubble/wrinkles.
- Color layer is reported to be
enclosed/protected between the outer plastic film and bottom adhesive layer… in
actual practice I have found that indeed it is not easy to melt away the color
layer and this prevents to produce local smudges etc.
- Totally moisture proof… a rare quality and very important for
longevity of finish.
Some other factors also looked promising
such as UV protection (I have 20+ year old models where the original color
pigment has almost faded away!) and no odor/ health hazard protection which are
very welcomed… despite the Graupner product label description stating this is light
blue Matt the film is high gloss as usual with
plastic base coverings.
Did I liked the covering? Definitely yes
and would recommend it even for beginners as it forgives initial mistakes… is
it the best or ultimate covering film?
I sincerely have to say no as there is no
such a thing as a PERFECT film covering… but Superfilm combines so
many desirable features that is surely in the list of my three favorite
all time coverings… and I am definitely not a model covering expert so it has
to be good!
PS: Even from the early vintage/golden days model airframe film covering was considered by many to be an art and science combined… it is also plain fact that it’s quite a difficult task to produce a truly show type finish using only film… but for the first time beginner film covering in general is probably the easiest and fastest way to produce an acceptable durable and lightweight finish!
***************
I welcome combined shipping as it can reduce
shipping cost of individual listed items considerably, in fact I urge you to
try it… saves time and money!
If you choose
to buy two or more of my listed items proceed as follows:
Select the items of interest from my listings
and then continue by first contacting me with your item description/list, I
will reply giving you new shipping reduced price for these… Due to size some
items are not a very good match for combined shipping but even then I will do
my best to lower the shipping cost for you.
- Item(s)
is part of my private collection gathered through 40+ years of aero modeling
career and not bought second hand for the sole purpose of commercial profit, as
I am just a private seller, therefore I can personally attest for the quality
of each item.
- Every
item is thoroughly inspected for good condition and/or functionality before
listed in eBay and double checked again before finally shipped.
Shipping Notes:
I have 100%
delivery success rate and total item received satisfaction of my buyers, just
read my feedback… but also please read the following:
-
Buyer
will receive exactly the number and depicted quality of the items shown in the
photos unless stated otherwise, as there are some cases that a specific item
maybe present just as an aid for the photo session.
- I will ship the package within five working days counting from the
next day the buyer completed the purchase.
-
At
same day of posting the package I will contact the buyer with Tracking number
and appropriate official carrier’s link to follow its progress, plus photos of
the parcel during processing at the Post Office which clearly show the official
Post documents and attached Tracking number.
-
It
is my standard policy that I exercise special care in handling and packaging
guaranteed for added safety during International shipping, I have high
confidence in the integrity of every parcel I prepare.
-
In
rare cases the delivery date maybe be somewhat longer than estimated date at
eBay due to extra workload of the carrier, I cannot take any responsibility for
shipping delays within your country or additional import charges.
-
Estimated
shipping delivery dates:
-> USA, Canada, Australia:
approximately 2-4 weeks.
-> Europe: approximately 1-2
weeks.
-
Upon
delivery of your package please check thoroughly its condition before accepting
it, if you detect serious external damage take some clear photos of it and
declare this damage to the delivery officer simultaneously postponing its
acceptance for a few days.
Immediately contact me describing
the damage in detail and provide me with your photos, I will evaluate the
extent of the damage and advise you on how to proceed.
Since I have personally prepared
the package I can judge of its integrity and so if I advise you to finally
accept it I take full responsibility of the integrity of its contents and
value.
Rest assured that superficial
dents and scratches even of 3/8 of an inch depth cannot do damage to my
multilayered packaging procedure and you can right away accept your package if
the damage is limited to only that extent.
If I judge by your description
and photos that the damage is very serious I will advise that you officially
declare the parcel “unaccepted due to shipping damage” additionally please get
a “denied acceptance document “ from your local shipping agent.
The package will be returned to
me and I will immediately refund the total amount to you after I have received
it back in its original package.
-
Honest
buyers will experience devoted honesty and transaction transparency along with
my personal care and attention to every package I send, also pro and after
sales advice and additional info/questions relating to your item.
-
Dishonest
buyers be aware that I am not easy on demands/ refunds based on
false/constructed accusations and evidence, a counter case will be opened to
you promptly.
-
In the rare event of a problem occurring, your
first action is to use the “Contact Seller” and your first option should be
“Sent Seller a message” before you ask for a return or refund or leave a
negative feedback or open a case and I will contact you promptly.
Thank you.