Specification:
Parameter:
Supply voltage: 5V 12V 24V
Trigger current: 0.1mA
Quiescent current: 2mA
Working current: 80mA 5V; 45mA 12V; 25mA 24V
Load capacity: 10A (AC 0 ~ 250V) or 10A (DC 0 ~ 30V)
Output form: NO / NC / COM (normally open + normally closed with the passive output)
Size: length 70mm * width 20mm * height 19mm
Feature:
1.This item is a one-way relay module, which is mostly used for single-button control
Electrical equipment, mostly used for weak current control.
2.Basic function: K terminal is triggered-down, relay is turned on, then triggered-down, relay
The device is disconnected and loops like this.
3.Using multiple anti-interference technology, the input signal can process the interference signal, and
And users can set different anti-jamming strength through the two pads of S1 and S2.
4.Power input has anti-reverse diode protection.
The module will not work, which can effectively prevent damage caused by human negligence.
5.The output is a relay dry contact, that is, without power (equivalent to a switch), passive output
Suitable for more applications, the wiring is more flexible and convenient.
6. With power indicator (red LED, power on--straight on) and work instructions
(Green LED, only when the relay is closed). The status of the module is clear at a glance.
Relay output:
1, NO1: 1 way relay normally open interface, the relay is suspended before the suction, after the pull-in is shorted with COM1
2, COM1:1 road relay common interface
3, NC1: 1 way relay normally closed interface, short circuit connection with COM1 before the pull-in of the relay, dangling after suction
4, NO2: 2 way relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM2
5, COM2: 2 way relay common interface
6, NC2: 2-way relay normally closed interface, short-circuit with COM2 before the relay is closed, and float after suction
Wiring diagram:
Package include:
1 PCS * Relay Module