Antelco 13mm Tee Elbow Hose FULL RANGE Garden Irrigation Pipe Connector
A range of original fittings made by Antelco one of the worlds leading irrigation suppliers.
All the fittings are disgned for use with irrigation supply pipe with an internal diamter of 13mm, typically 16mm external. The fittings are simple to use and provide a secure way of constructing a garden irrigation system. Installtion into pipe can be made easire if the pipe is gently warmed, in hot water as an example, to provide a little bit of stratch when inserting.
This range is for 13mm pipe, other ranges are available for 4mm. Our own Hortafix range is available here
13mm LDPE Pipe is available from this listing: LDPE PIPE
| Pipe Valve | Fits pipe with an internal diameter of 13mm (typically 16mm OD) |
| Reducing Tee 13mm x 4mm branch - internal pipe diameters | 13mm reducing to 4mm tee piece - easily install off-takes of micro supply pipe from 13mm supply pipe. Double barb for increased retention. Mmade from tough UV stable material for a long life. |
| Elbow | For 13mm ID irrigation pipe (typically 16mm OD), allows 90d turns without running the risk of kinking pipe. Single barb fitting Mmade from tough UV stable material for a long life. |
| Tee | For 13mm ID irrigation pipe (typically 16mm OD), allows branches to be taken from main supply pipe. Single barb fitting Mmade from tough UV stable material for a long life. |
| Joiner | For 13mm ID irrigation pipe (typically 16mm OD), allows two lengths to be joined. Single barb fitting MMade from tough UV stable material for a long life. |
| End Plug | For 13mm ID irrigation pipe (typically 16mm OD), provides secure waterstop at end of pipe run. Single barb fitting MMade from tough UV stable material for a long life. |
| Cross | For 13mm ID irrigation pipe (typically 16mm OD), provides a method to connect 4 13mm ID irrigation pipes. Single barb fitting MMade from tough UV stable material for a long life. |
| Ratchet Clamp | For 13mm ID irrigation pipe (typically 16mm OD), improves security of pipe connections. Ratchet connection allows removal and refitting. M |
| Saddle Clamp | For 13mm ID irrigation pipe (typically 16mm OD), allows pipe to be securely fitted against wall / fence or similar. Holes for screws (not supplied) MMade from tough UV stable material for a long life. |
| Pipe Stake | For 13mm ID irrigation pipe (typically 16mm OD), allows pipe to be securely fitted held in place in ground. MMade from tough UV stable material for a long life. |
| Pipe Cutter | 2 -in-1 Punch & Cutter is combination tool equipped with everything you need for easy and simple installation of emitters and fittings within a micro irrigation system. The pipe cutter features a sharp, angled blade capable of easily cutting LDPE pipe, dripper tube and soaker hoses up to 19mm ID (22mm OD), whilst it’s shape aligns the tube for a clean, square cut each time. The puncher can easily punch a hole into 13 mm and 19 mm LDPE for the installation of drippers, sprays, rigid risers and micro tube fittings. The punch pierces a clean hole and removes wad leaving the tube free of debris. A spring back feature ensures the blade is always covered when not in use and helps with both the cutting and punching action, making it a safe to carry around the garden. |
| Snap On Connector | For 13mm ID irrigation pipe (typically 16mm OD), provides a connection to standard garden hose quick connectors. Single barb fitting MMade from tough UV stable material for a long life. |