7 µF (uF) capacitor (permanent or starting) special for motor Nice, Gaposa, Becker, Bubendorff roller shutter or blind; delivered with an adhesive support foam and new adapter lugs.
Condition : brand new professional equipment. You see in the photo what you buy, the product is 100% compliant and genuine.
Origin : capacitor created in France!
Application : to replace the capacitor (known as permanent or start-up) on all types of engine Nice, Gaposa, Becker, Bubendorff, etc ... roller shutter, blind or garage door.
Examples of failure symptoms : when your engine stops after a few cm on ascent, or you have to help it by hand to climb, or it shows weaknesses, or makes an abnormal noise... is that the capacitor is worn. By changing it, your engine will become like new again! Another possible symptom, the motor does not move at all, neither when going up or down, it can also come from the capacitor in this case.
Specific capacitor for awning or roller shutter motor :
My Capacitors are specially designed to operate on awning and roller shutter motors. You just have to determine the value you need. On your old capacitor, the value in µF (uF) is written on it. The model proposed in this advertisement is a 7 µF (uF). For other value check out my other listings in my Ebay store.
- For the rest (class A / B / C, standard, tolerance, etc.), it doesn't matter, my capacitors are compatible with all roller shutter and awning motors.
Technical characteristics :
- My capacitors are high performance, professional grade models. In addition, I check them with a capacitance meter before shipping.
- In self-healing metallized polypropylene for an extended lifespan (more than 50,000 hours under 230 Volts).
- They tolerate high temperature up to 85 °.
- Complies with European standard EN 60252.
- Self-extinguishing reinforced plastic condenser body.
- Applicable voltages: 220 Vac, 230 Vac,… and up to 500 Vac!
- Perfectly replaces all Facon 7µF, Icar Ecofill WB 4070, AV Arcotronics 1.27.6CAV MKP, Scr Pmc 500, Italfard RP-2 series etc ...
New adapter lugs supplied for connection to the wires if necessary :
- If the old capacitor is a wire model, you can connect the new capacitor to the wires with the 2 terminals provided. For installation, you will have to cut the 2 wires flush with the old capacitor, then strip the 2 wires over 1 cm, put the new terminals provided on each wire, then pinch the terminals with a simple pliers to crimp each wire above , and finally all that remains is to fit the new capacitor onto the new terminals. The new capacitor will then be connected to the 2 wires via the 2 terminals. There is no sense of connection (no polarity), you can plug in any direction.
Dimensions :
- Capacitor diameter: 30 mm (the capacitor therefore easily fits into all the motor tubes).
- Capacitor length without terminals: 70 mm. With the terminals, it is necessary to add 14 mm.
- The fixing screw at the bottom of the capacitor can be cut if necessary (to save space).
Available with capacitor, 2 new adhesive foam strips :
- Sometimes when you dismantle your motor, you will see a holding foam stuck around your old capacitor. By taking off this foam, it can be damaged. That's why I'm giving you one free with each capacitor. You can use it as a replacement if necessary. It just sticks around the new capacitor.
Why choose a quality capacitor?
- the capacitor plays an important role in a tubular motor. The capacitor produces a phase shift on one of the two motor coils, which generates a rotating magnetic field and torque, and rotates the motor axis. If you choose a low-end capacitor (bad tolerance, unstable value over time ...), the phase shift will not be good, the motor will malfunction and it will fail again in the medium term.. So, you really have to put qualityé. Capacitor quality = extended motor life!
Free assistance : vYou can contact me by Ebay message or phone if needed (even on weekends). I have over 2,500 positive reviews on Ebay for the quality of service and products offered.
Fast and careful shipping : I send the day after the purchase in a reinforced bubble letter by La Poste. The package will be sent by priority postage with a tracking number and will be left by your postman in your mailbox.. In addition, beyond 4 capacitors purchased, the products will be sent in a Colissimo package.