Package List:
1* HT201 Attenuator
1 * Auto Test Lead
1 * Auto Test Lead
5* Complete Acupuncture Probes
20 * Replacement Needles
Test lead of a male BNC connector to (2) 4mm connectors. It's a special line for assisting automobile measurement instruments to test various types of signals. 4mm connectors are coded in two colors, black and red. Lead length is about 3 meter.
Features:
The auto test cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
High quality and professional high voltage auto test lead.
It's about 3 meter in length allows the oscilloscope to be placed on the work bench away from the car being tested or repaired.
It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.
It adopts full shield which can help reduce the noise interference.
Note:
To avoide the lines twisting together, the two pieces of lines with connectors are not the same in length.
The short line is earth wire, and the long line is positive pole which should be connected with the auto engine cable, which also can cooperate with a 20:1 attenuator.
Specifications:
Probe Quantity: 1 pc
Peak Attenuation Ratio: 10000：1
Input Resistance: 50Ω
Length: Approx. 2.9m / 9.5ft
Features:
The auto test cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
High quality and professional high voltage auto test lead.
It's about 3 meter in length allows the oscilloscope to be placed on the work bench away from the car being tested or repaired.
It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.
It adopts full shield which can help reduce the noise interference.
Note:
To avoide the lines twisting together, the two pieces of lines with connectors are not the same in length.
The short line is earth wire, and the long line is positive pole which should be connected with the auto engine cable, which also can cooperate with a 20:1 attenuator.
Specifications:
Probe Quantity: 1 pc
Peak Attenuation Ratio: 10000：1
Input Resistance: 50Ω
Length: Approx. 2.9m / 9.5ft
This acupuncture probe is a back pinning, piercing and repairable probe. This set includes 5pcs complete acupuncture probes, 2pcs screws, and 20pcs replacement needles.
Features:
The fine tip can slide past weather pack seals to probe connectors.
As acupuncture probes, they are used for piercing the insulation of wires to allow for automotive electrical measurements without causing damage to the wires.
They can be used as pin-tip probes while working with small circuit boards.
The set of 5 probes also comes with 20 replacement pins, there's no need to replace the whole probe.
Its small diameter, extra sharp pin makes it ideal for piercing the insulation on small gauge wires.
Specifications:
Probes Color: Black/Blue/Yellow/Red/Greem
Acupuncture Probes: 5pcs
Replacement Needles: 20pcs
Complete Probe Length(1pc): 65mm / 2.56in
Features:
The fine tip can slide past weather pack seals to probe connectors.
As acupuncture probes, they are used for piercing the insulation of wires to allow for automotive electrical measurements without causing damage to the wires.
They can be used as pin-tip probes while working with small circuit boards.
The set of 5 probes also comes with 20 replacement pins, there's no need to replace the whole probe.
Its small diameter, extra sharp pin makes it ideal for piercing the insulation on small gauge wires.
Specifications:
Probes Color: Black/Blue/Yellow/Red/Greem
Acupuncture Probes: 5pcs
Replacement Needles: 20pcs
Complete Probe Length(1pc): 65mm / 2.56in
20:1 Attenuator (HT201)
Product introduction：
Designed for assisting automobile measurement.
Specification:
Attenuation: 20:1
Bandwidth: 10MHz
Input Res: 1.053M
Specification:
Attenuation: 20:1
Bandwidth: 10MHz
Input Res: 1.053M
