Attention: Applicable people of the box (please read this friendly reminder carefully before buying):

More information please check 

This box is very very professional, and many functions need to cross several industries. It is a product for professional engineers.

If you still stay at this kind of question: how to use this lighting software? How to do the light library? How to connect lights? How to do this effect? How to program this program? How to edit files in linux? How does linux open files? If you are waiting for such basic questions, please do not buy it. This box is not suitable for use, because this box does not provide any basic teaching and technical support services. This box is a cross-border box for professional engineers. Perfect for novices. Of course, any master starts from a novice, so it is recommended that novices join our exchange group to learn, and then come to buy if they understand it, thank you for your support.

W-BOX technical function:
1: The box has 8 isolated DMX512 outputs and 8 WS281x LED lights with SPI output, which can not only control DMX512 devices, but also directly control LED lights;
2: Box has a 150M, 2.4G Wifi;
3: The box has 2 network ports, and the box has its own switch and router. You can cascade more boxes hand in hand through the network cable to form a large lighting control system, without additional switches or routers;
4: The box has an SD card, which can support FAT, FAT32, NTFS, EXT4 formats, and the SD card can save audio and video files and DMX light files for offline playback;
5: The box has a universal USB HOST interface, which can be connected to USB devices such as U disk, USB-Hub, USB sound card, USB mouse, keyboard, USB-RS232 serial port, etc ;
6: The box can play most audio and video files, supports AVI, MPG, WMV, JPG, BMP, GIF, WAV, MP3, FLAC, APE and our dedicated DMX and l3a files, and can map video and DMX files to the lighting;
7: The box has many external interfaces, such as GPIO, I2C, UART, PWM, IR… It can be triggered by external devices to play the offline files of the box, and it can also be connected to external sensors to trigger the control box or control external devices;
8: The box has 1 infrared IR receiver, through learning, it supports more than 99% of the remote controls on the market, and it also has 1 IR infrared transmitter GPIO interface;
9: The box has a Web UI so the box can be controlled and set through a browser of any platform. There is also a simple console in the webui, which can test and control the lighting through a mobile phone or tablet;
10: There are 2 CPUs in the box, the running system is Linux, and the startup time is about 17 to 23 seconds;
11: The box can receive and process the latest version of Artnet, sACN, ESP, hahan… and other lighting network protocol data at the same time to control the lighting. Different protocols do not need to be switched, they will be processed at the same time and automatically resolved;
12: The box can capture any light show written by a physical console with network transmission or simulation software through the network, and save it as an offline DMX file dedicated to the box, which is convenient for box playback or external device call and trigger.
13: The box supports many professional software, most of which have been cracked.
…

No.	Property	Note	Remarks
1	power adapter	DC In: 7.5V～25V / 2A～1A	box power: 8W
2	DMX512 Output	8 port of 250K standard DMX512 output, with optical signal and electrical signal isolation,each channel has an exclusive 16bit domain address, and each channel can independently set any port from 0 to 65535	hardware with 3 DC-DC power isolation, 8 signal optical isolation
3	LED Output	8 universe, 800K single-line output, timing compatible with WS281x chips	2 output lines, each line outputs 4 universe, also compatible Madrix patch fixture with dmx512 mode
4	WiFi	2.4G / 150Mb , can be set to open and close freely	start peak:800ma , working:120ma
5	LAN port	2 port 10M/100Mb adaptive lan interface, programmable	LAN1 and SD card/PWM multiplexing, LAN1 and SD/PWM cannot be used at the same time, choose 1 of 2
6	USB port	Host, can connect to most USB devices, special devices need us to write drivers	DC: 500ma output, with PTC protection
7	SD card	TF card, support any capacity	support FAT、FAT32、NTFS、EXT4
8	button	1 hard reset RST button (if pressed the box will reset and restart), 1 multi-function WPS button	WPS has 2 functions. If box Wifi is turned off, press and hold WPS for 5 seconds, wifi will be turned on, if you continue to hold for more than 20 seconds, the box will be restored to the factory settings
9	LED indicator	5 LED lights, 2 green lights, 2 yellow lights, 1 red light	different combinations of flashing, on and off have different definitions
10	I2C	1 port 100K/400K	have command line tools, easy script programming
11	infrared IR	1 receiving, 1 transmitting (IO port mode)	can support more than 99% of infrared remote controls on the market, the box does not have a remote control, the remote control needs to be set (learned) before it can be used
12	PWM	2 port: PWM0、PWM1	GPIO multiplexing, with command line tools
13	UART	3 port: UART0 for Linux, UART1/UART2 for general equipment	UART1/2 multiplexed with GPIO, TTL level, UART1 is 3.3V, UART2 is 5V, Not RS232, connect to RS232 will burn the main chip!
14	GPIO	2 port	can reuse other function pins to release more GPIO
15	3.3V/5V output	one 3.3V/ one 5V	5V with PTC protection, limited to 500ma, 3.3V without protection, if the output power plus the total power of the box is greater than 8W, it will protect, So, please try not to use 3.3V to power external devices, because 3.3V consumes a lot of power

attention please: If you do not have professional knowledge, please do not easily connect items 10~15, because these pins are directly connected through the main CPU chip. The core working voltage of the CPU is 1.2V/1.8V, and the maximum voltage that the pins can withstand is 3.3V, if the external signal or power supply greater than 3.3V is connected by mistake, the CPU will be burned, If the CPU is burned, the box will basically be scrapped. Burned chips are not covered by the warranty. The box will be sealed when leaving the factory, If you tear the seal, Will be deemed to automatically waive the warranty rights, Please pay attention to this clause.

Status	Green 1	Yellow 2	Green 3	Yellow 4	Red 5	Note
DMX512 output start status	–	Long bright	–	Long bright	Flashing	Yellow 2, 4 will flash alternately once, the red 5 light will light up first and then flash
LED output start status	–	Long bright	–	Off	Flashing	Yellow 2, 4 will flash alternately once, the red 5 light will light up first and then flash
DMX512 control status	–	Flashing	–	Long bright	–	Red light is on or flashes occasionally (normal working state)
LED control status	–	Long bright	–	Flashing	–	Red light is on or flashes occasionally (normal working state)
LAN0 status	Flashing/Bright	–	–	–	–	Long light indicates that the network cable is normal, flashing means have network data
LAN1 status	–	–	Flashing	–	–	Flashing means that the access network cable is normal, have network data
Wifi status	–	–	–	–	Flashing/Bright	Connect wifi and have Wifi data will flash
Factory mode	–	–	Flashing	Flashing	Flashing	Please press the Rest button or unplug the power to reset once
Upgrade firmware mode	–	Stop flashing	–	Stop flashing	Flashing	Do not turn off the box power during the upgrade, the upgrade will take 3 minutes
Boot failure	–	–	–	–	No flashing/No light	The red light does not turn on or flash when box power on, Major failure, Please contact us
Unable to clear fault	–	Flashing alternately	–	Flashing alternately	–	Yellow 2 and 4 flashes alternately for a long time, the fault can’t be cleared, please contact us (see the picture below)