PRODUCT DESCRIPTION

2 year replacement filter for 7 stage REVERSE OSMOSIS SYSTEMS with 10" pre-filter cartridge sizes (25.4 cm length) with Energizer negative ions, 19 pieces

The following filter cartridges are included:

4x1. Stage: sediment filter 5 µ: filtering of sand, rust, dust particles, coarse impurities, insects
4x2. Stage: Activated Carbon Block Filter: Filters chlorine, heavy metals, solvents, insecticides, medications, etc.
4x3. Stage: sediment filter 1 µ: See above, filters carbon dust from the activated carbon block ( 2. Level )
2x5. Stage: activated carbon filter made from coconut activated carbon, binds chemical substances, chlorine, improves the taste

2x6. Stage: Mineralizer, releases calcium, magnesium, potassium, sodium, the taste changes, the pH value is raised, the pure water is refreshed through oxygen enrichment, similar to a natural riverbed. 

2x7. Stage: Energizer with negative ion release: additionally refreshes the water, changes the cluster structure, has a health-promoting effect, full-bodied taste, very digestible

1x Membrane: 75 GPD branded product

- Advantages of regular filter changes:

The service life of downstream filters increases (activated carbon filters, reverse osmosis membranes, other filters)
Delays germination, fungal growth, biofilm formation
Improves the taste of the water
Possible ''oversaturation'' of the filter is avoided. This means that the maximum absorption capacity/lifespan has been reached and in this state the filter can even release pollutants back into the water.

TECHNICAL DATA

Filter type 1. Stage: sediment filter 10" (inch)

Fineness: 5µ
Inner diameter: 3cm
Outer diameter: 6cm
Length: 25.4
Water pressure min. 1.5 bar
Water pressure, max. 6 bar
Pressure reduction: 0.2-0-4 bar
Material: polypropylene foam
Temperature range water: 2°C - 45°C
Interval filter change: 6 months according to the drinking water regulations or more frequently

Filter type 2. Level: Activated Carbon Block 10" (inch)

Inner diameter: 3cm
Outer diameter: 6.8cm
Length: 25.4
Water pressure min. 1.5 bar
Water pressure, max. 6 bar
Pressure reduction: 0.2-0-4 bar
Material: polypropylene foam
Temperature range water: 2°C - 45°C
Interval filter change: 6 months according to the drinking water regulations or more frequently

Filter type 3. Stage: sediment filter 10" (inch)

Fineness: 1µ
Inner diameter: 3cm
Outer diameter: 6cm
Length: 25.4
Water pressure min. 1.5 bar
Water pressure, max. 6 bar
Pressure reduction: 0.2-0-4 bar
Material: polypropylene foam
Temperature range water: 2°C - 45°C
Interval filter change: 6 months according to the drinking water regulations or more frequently

Filter type 4. Stage: membrane, change every 2 years

Filter type 5. Stage activated carbon afterfilter inliner (postcarbon)

Connection size: 1/4" trunk, see picture

Length: 10"

Diameter: 2"

Water pressure min. 1.5 bar
Water pressure, max. 6 bar
Pressure reduction: 0.2-0-4 bar
Material: PE cover, zeolite
Temperature range water: 2°C - 45°C
Interval filter change: once a year

Filter type 6. Level of mineralization

Connection size: 1/4" trunk, see picture

Length: 10"

Diameter: 2"

Water pressure min. 1.5 bar
Water pressure, max. 6 bar
Pressure reduction: 0.2-0-4 bar
Material: PE cover, zeolite as mineralizer
Temperature range water: 2°C - 45°C
Interval filter change: once a year

Filter type 7. Stage energizer using negative ions

Connection size: 1/4" trunk, see picture

Length: 10"

Diameter: 2"

Water pressure min. 1.5 bar
Water pressure, max. 6 bar
Pressure reduction: 0.2-0-4 bar
Material: PET cover, food-safe, emits negative ions 
Temperature range water: 2°C - 45°C
Interval filter change: once a year

TECHNICAL DATA

ADDITIONAL INFORMATION

CONTACT

 SEE BELOW " 

"Legal status of the seller"

PICTURES