Two 120mm (4 5/8") DOMETIC, NORCOLD, COLEMAN Refrigerator cooling Fans with two automatic ON/OFF Thermostats, Wiring, Mounting Brackets, a FREE 12V Circuit tester, and everything else you need for a smooth and trouble-free setup.
FREE
Tips, Troubleshooting Instructions, a 12V Circuit tester, and a neat bag
with "must-have" hardware is included with your purchase - courtesy
of applianceandair©.
(After over 40 Years of repair service - I may know what you're looking
for!)
Are you tired of your refrigerator not cooling your food and drinks as it should? This kit with two external cooling fans can lower the temperature inside the refrigerator, reduce the time to reach the desired temperature, and boosts the performance by up to 30%.
Our setup removes the heat on the back of your
fridge (not just spinning the already hot air around...)! Just install both
fans behind the top vent to blow the hot air outside. Alternatively, mount both
fans behind the bottom vent to pull fresh air inside, an excellent solution if
you have a top-vent!. Moreover, YES - you could install one fan on top and the
other on the bottom vent.
Important: With our setup - you do not need to pull the fridge out for the fan installation; just open the access panel on the outside of your RV...
What you need to know: RV refrigerators don't use
a compressor; instead, they use heat from an electric heating element or an
LP-gas flame. The heat created by the cooling process circulates within a
narrow space behind the refrigerator. Air enters through the lower access panel
and moves the hot air out through the upper access panel or roof vent. That
creates a dead air space directly behind the refrigerator, drastically reducing
the efficiency!
The
best way to increase the cooling efficiency of your refrigerator is to increase
the airflow on the back of the fridge. You need to install one or two 12-Volt
DC circulation fans at the back of the fridge and a thermostat to switch the
fans ON when the heat rises.
Included
with your purchase:
1. Two ULTRA QUIET 12V DC square cooling Fan 120mm x 25 mm - 4 5/16" x 1".
Exceptionally low noise with ultra-quiet precision ball bearings - over 1600 happy customers - and counting!
Specification:
Both fans together: 0.34A moving about 130 to 140 CFM
2. Two
activating Fan-Thermostats 110º and 120ºF for automatic fan control - choose
the one that fits your needs best! It will switch the fan ON/OFF when the back
of the fridge is overheating (no manual switch needed!). We do not recommend a
thermostat with less than100ºF degrees - the fans may run all day! Sooner
or later, you will have warm drinks and an empty battery...
3. Four
angle brackets with wood screws, nuts, and bolts for the fan mount.
4.
52" 2-strand flex wire, Red (+) and Black (-).
5. 5
Self-sticking bases to hold the thermostat and wires to the back wall.
6. Wire
ties to lock the thermostat and wires to the self-sticking base.
7.
Installation instructions plus tips and tricks on how to keep your A/C running!
8. One
FREE Circuit Tester 6V - 12V - 24V DC
FAST Shipping -
SHIPS TODAY with USPS First Class Mail, incl.
Tracking/Delivery Confirmation via e-mail!
Orders before 2 PM Eastern Time (EST). Delivery in just 2-3 days (usually).
We appreciate and thank you for your business. Have a blessed and beautiful day! Appliance and Air©.