Shielding paint for shielding high-frequency radiation (HF) and low-frequency electric fields (LF). Special paint with great all-round characteristics – delivered as a powder. Up to now our best powder paint to the best possible price! Breathable, plasticizer-free, low-emission and without a preservation agent. With very good physical and chemical properties, along with very high ecology.

We first produced a powder paint in 2003, but liquid paints become the established ones. The reason for this was the low performance of an electric screwdriver which was not sufficient for the ingredients that needed to be dispersed – in our production we need more than 100,000 Watt for a professional result. After a longer development time we have now found the perfect formula for powdered shielding paints.

Screening attenuation

Variation 1 (more water):
At 1 GHz: Single layer 31 dB | Double layer 38 dB | Three layer 44 dB
At 40 GHz: Single layer 30 dB | Double layer 44 dB | Three layer 58 dB

Variation 2 (less water):
At 1 GHz: Single layer 37 dB | Double layer 43 dB | Three layer 48 dB
At 40 GHz: Single layer 38 dB | Double layer 57 dB | Three layer 75 dB

Measurement from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006

Special characteristics DRY54:

• This powder shielding paint can be mixed up with more or less water
• When using alternative 1 (more water), the paint stays nearly as liquid as water while mixing – the dust formation is extremely limited, as the powder blends immediately with the water. The paint becomes thicker after 15 minutes resting time – it can be perfectly painted with afterwards and you will get a nice flow for an even shielding.
• When using alternative 2 (less water), the paint gets paste-like. Formation of dust and amount of work are higher, the finished amount of paint is approx. 17 % less. The advantage is a 6 dB higher shielding attenuation. The paint becomes as thick as a usual dispersion paint after 15 minutes resting time and can be painted as well as a dispersion paint.
• The phenomenal price-performance-ratio is achieved, as the DRY54 only costs half as much as our liquid paints. That is why you can paint two times for the same costs.
• The powder gets bagged and then vacuum-packed three times. Vacuum-packed into one another, using three bags – that is why no moisture will get into the powder, even years later.
• The powder needs to be mixed with water – what you will need to do so: Digital scales, protective mask, safety glasses, our paint stirrer AR42 or AR84, a bucket for mixing, a drilling machine (electric screwdriver) and 15-30 minutes of your time.

General advantages of powder paints:

• Has a very long shelf life without water
• No preservatives necessary
• Reduced risk of frost damages
• 50-80 % less plastic waste
• Less delivery costs (up to 60 %)
• More security during transit in case of packaging damages
• Small partial quantities can be taken out of the bag for necessary repair works
• Colour: Black.
• Grounding: Must be grounded! We recommend interior the Grounding Tape GSX-10 plus Grounding Plate GS3, with Grounding cable GL-200 Plugged into Grounding plate Tube-GT/Attach to copper Heating Pipes or Grounding Plug GP1 ? (German & French systems) also available: (UK) Earth Plug GPG , exterior the Fibre Additive AF3 plus the Grounding Plate GF4 with Grounding rod GR-40/Exterior

Optional: Fibre additive AF3 For crack bridging and a better grounding we advise our fibre additive AF3 with long conductive carbon fibres. 

Delivery 2 - 3 business days